VASB Cast-in Anchor without Mounting Plate

The VASB cast-in anchor without mounting plate is a modern take on the classic embedded fastener. Cast-in anchors have an internal thread and, once installed, serve as a base for attaching external structures. The distinctive feature of such anchors is that they are not screwed into a finished slab, but are cast into the concrete while it is still wet, during pouring. Once the mix has cured, the anchor is firmly fixed in the material and can carry a substantial load. A classic example of a cast-in anchor is the heavy wall hooks used for cast-iron radiators: they protrude from the surface, but for secure fixation in concrete or brick they always have a crossbar perpendicular to the anchor shank. Removing such a fastener can damage the structure of the slab.

Anchor design features

The VASB cast-in anchor without mounting plate has a main shank with an internal thread and a perpendicular locking arm whose thickness is nearly the same as that of the main shank. This is enough to securely fix the fastener in the material and protect it against misalignment or breakdown of the concrete mix.

Installation features

The cast-in anchor is installed in the material at the moment the concrete or cement mix is poured. The fastener is held in place by the material itself — once the mix has cured, the anchor ends up firmly embedded in the slab. The internal threaded section is used for installing rods, hooks, bolts, screws, or similar fasteners.

• the advantages of cast-in anchors are secure fixation, high load capacity, and a concealed installation;
• the drawback is the complexity of installation and the inability to remove the anchor without damaging the slab material.

Cast-in anchors are widely used. Concealed steel fasteners provide high load-bearing capacity and durability. With a protective coating, steel barely corrodes inside the material of ceiling or wall slabs.

FLOK supplies VASB anchors wholesale and retail. All sizes are available from stock.

VASB Cast-in Anchor without Mounting Plate

A cast-in anchor is a fixing element installed in the concrete mix before it cures. The product has an internal thread and can be equipped with additional elements — a tie rod and a flange (VASD). The fastener should be loaded only after the concrete has fully cured. Sormat cast-in anchors are certified as steel elements.

Tuote (mm)	kpl/pcs
10x60	100
12x50	100
12x70	100
16x50	50
16x90	50
20x100	50
24x130	25

The cast-in anchor is made of zinc-plated and stainless steel.