Multi-Monti R Anchor

The Multi-Monti R anchor is a steel fastener for installation in concrete, brick or stone bases. Instead of a slotted head, the anchor has a solid ring. Otherwise, the design is similar to other anchors in the Multi-Monti series: the pointed solid thread on the shank works as a self-tapping system, allowing the fastener to be installed and securely fixed in a pre-drilled hole. Multi-Monti R series fasteners are made from carbon steel with an optimal balance of strength and ductility. Corrosion protection is provided by an additional coating – the anchor surface is electrolytically coated with a thin layer of zinc.

Design features

The pointed thread of the anchor secures the fastener in the material. When installed according to the recommendations, the anchor can be used to suspend loads or attach structures of a certain weight.

• With vertical installation of the anchor (for example, into a ceiling slab), the weight applied to the ring causes the fastener to work in tension. To prevent the anchor from being pulled out under load, it is important to observe the recommended driving depth and not exceed the hole diameter for the fastener;
• With horizontal installation, the anchor shank mainly works in shear, which provides significantly greater load capacity. However, here too, to prevent the fastener from being pulled out of the slab, it is important to drive it to the recommended depth (for example, for a 6 mm diameter anchor, this is 40 mm).

Before installing the anchor, it is important to thoroughly remove debris and other residue from the pre-drilled hole – this ensures the fastener installs easily and is securely fixed.

Since there is no slotted head, special tooling or pliers are required to install the Multi-Monti R anchor. To make driving easier, the anchor’s ring is flattened on both sides.

Application

Multi-Monti R anchors are used both professionally (in construction, installation and repair work) and for household purposes.

FLOK supplies Multi-Monti R fasteners wholesale and retail, in a wide range of sizes.

Multi-Monti R Metal Anchor

Fastener SKU	Type	Drill diameter, mm	Min. embedment depth, mm	Loop, mm	Package, pcs	Recommended load, kN (Concrete without cracks C20/25)*
71041	HMS-R 6 x 40	5	40	7 / 14	200/2000	4.2

• In accordance with the manufacturer’s recommendations