Multi-Monti S A4 Anchor

The Sormat Multi-Monti S A4 (MMS-S A4) metal anchor is used for fastening fixtures in concrete, solid brick and natural stone. It has a hexagon head and is made of acid-resistant A4 steel.

Stainless steel is not subject to corrosion, so the anchor is suitable for outdoor installation and for rooms with high humidity. The anchor screw is installed into a pre-drilled hole in concrete or other dense material without thread cutting and without auxiliary elements. The special thread provides a secure fixation and prevents pull-out.

Anchors of this type are used in construction and finishing works for fastening structures to walls and ceilings.

SKU	Type	Drill diameter, mm	Min. embedment depth, mm	Bit size	Package, pcs
70991	MMS-S A4 7.5 x 10 x 65	6	55	SW 13	100/1000
70992	MMS-S A4 7.5 x 10 x 75	6	65	SW 13	50/500
70993	MMS-S A4 10 x 10 x 85	8	75	SW 16	50/500
70994	MMS-S A4 10 x 20 x 95	8	75	SW 16	25/250
70995	MMS-S A4 12 x 10 x 100	10	90	SW 18	25/250
70996	MMS-S A4 12 x 30 x 120	10	90	SW 18	25/250

Loads for Sormat Multi-Monti S A4 (MMS-S A4) metal anchors

Type	Recommended load, kN (Concrete without cracks C20/25)*	Recommended load, kN (Concrete with cracks C20/25)*	Allowable load, kN (Concrete without cracks C20/25)**	Allowable load, kN (Concrete with cracks C20/25)**
MMS-S A4 7.5 x 10 x 65	3.7	-	2.0	0.5
MMS-S A4 7.5 x 10 x 75	5.3	-	2.6	1.8
MMS-S A4 10 x 10 x 85	6.8	-	4.8	3.7
MMS-S A4 10 x 20 x 95	6.8	-	4.8	3.7
MMS-S A4 12 x 10 x 100	8.3	-	6.3	4.9
MMS-S A4 12 x 30 x 120	8.3	-	6.3	4.9

• In accordance with the manufacturer’s recommendations

** In accordance with approved certifications