Sleeve Anchor Bolt

Sleeve anchor bolt — an expansion fastening element for installation in walls and floor slabs made of solid dense materials: concrete, brick masonry, natural stone. The sleeve is the expanding part that increases in size as the threaded part of the fastener is screwed in. Due to the wedging action, the anchor is firmly fixed in the wall.

The fastener is suitable for installing various building structures and withstands significant loads. It is made of corrosion-resistant materials, ensuring long-term reliable operation.

Technical description of the sleeve anchor bolt

M6 10L	M6	55	10	12.5	45	10	0	6.5	12	50	35	70	6.5	5.0	44-015
M6 25L		70				25									44-020
M6 40L		85				40									44-025
M8 10L	M8	65	13	17	50	10	0	9.0	14	55	40	80	15	7.5	44-055
M8 25L		80				25									44-060
M8 40L		95				40									44-065
M10 10L	M10	75	17	21	60	10	0	11	16	65	50	100	27	13	44-105
M10 25L		90				25									44-110
M10 50L		115				50									44-115
M10 75L		140				75									44-120
M12 10L	M12	90	19	24	75	10	0	13	20	85	60	120	50	23	44-155
M12 25L		105				25									44-160
M12 40L		120				40									44-165
M12 60L		140				60									44-170
M16 15L	M16	125	24	30	115	15	0	17	25	125	95	190	120	–	44-205
M16 30L		150				30	10								44-210
M16 60L		180				60	30								44-215
M20 60L	M20	195	30	37	130	60	25	22	32	140	115	220	230	–	44-255
M20 100L		235				100	60								44-260
M24 100L	M24	255	36	50	150	100	25	26	38	160	125	240	400	–	44-305
M24 150L		300				150	100								44-310

Type	CONCRETE, fck,cube = 30N/mm2 (C20/25)
	Characteristic load (kN)		Design load (Factored) (kN)		Recommended load (Unfactored) (kN)		Distance from wall edge (mm)		Spacing between anchors (mm)
	Pull-out load (NRk)	Shear load (VRk)	Pull-out load (NRd)	Shear load (VRd)	Pull-out load (Nrec)	Shear load (Vrec)	Pull-out load (Ccr,N)	Shear load (Ccr,V)	Pull-out load & Shear load (Scr,N) (Scr,V)
M6	9.6	8.2	4.5	4.5	3.8	3.8	80	100	120
M8	12.1	12.8	5.6	7.1	4.7	5.9	100	120	150
M10	16.7	20.9	7.7	11.6	6.4	9.7	120	160	180
M12	24.6	30.5	11.4	16.9	9.5	14.1	160	180	250
M16	57.4	55.3	26.6	30.7	22.2	25.6	190	260	290
M20	79.4	88.1	36.8	48.9	30.7	40.8	250	300	330
M24	99.0	122.8	45.8	68.2	38.2	56.8	280	350	420

Type	Sleeve length (mm) (s)	Hole diameter (mm)****(do)	Min. anchorage depth (mm) (ho)	**Working anchorage depth (mm)****(hel) Minimum base thickness (mm) (hmin) Recommended tightening torque (Nm) SKU
					30N/mm2 CONCRETE (Tinst)	20.5N/mm2 BRICKWORK (Tinst)
M6S	45	12	50	35	70	6.5	5.0	44-010
M8S	50	14	55	40	80	15	7.5	44-050
M10S	60	16	65	50	100	27	13	44-100
M12S	75	20	85	60	120	50	23	44-150
M16S	115	25	125	95	190	120	–	44-200
M20S	130	32	140	115	220	230	–	44-250
M24S	150	38	160	125	240	400	–	44-300