What gets ordered most often
High-demand items with clear pricing and stable availability. The selection is updated based on sales results — materials that genuinely perform on site.
Universal wood screw 4.2×75
Universal screw for fastening to timber, chipboard, OSB and thin metal. Sharp point, countersunk head for a PZ bit, yellow zinc coating.
A500S Ø12 mm rebar
Ribbed A500S reinforcing rebar, 12 mm diameter, for reinforcing concrete structures. Crescent-rib profile, weldable, GOST 34028-2016 standard.
Drywall sheet GKL 12.5×1200×2500 mm
GKL gypsum board sheet, 12.5 mm thick, for building walls, partitions and suspended ceilings in dry rooms. Tapered edge for joint filling.
Tile spacers 2 mm
Two-armed plastic 2 mm spacers for forming an even joint between ceramic tiles. Suitable for wall and floor tiling.
Aluminium angle 25×25×2 mm, 2 m
Equal-leg aluminium angle 25×25×2 mm, 2 m long. Anodised silver finish, for protecting corners and decorative finishing.
C8 galvanised corrugated sheet
C8 profiled sheet made of galvanised steel, 0.45 mm thick. Wave height 8 mm, for building fences, roofing and cladding.
Mineral wool slab 50×600×1200 mm
Stone wool slab, 50 mm thick, density 35 kg/m³. Non-combustible insulation for walls, roofs and facades, thermal conductivity 0.039 W/m·K.
Geotextile 150 g/m² roll 2×50 m
Needle-punched non-woven geotextile with a density of 150 g/m² for drainage, separating soil layers and reinforcement. Roll 2×50 m, 100 m² of fabric.
Deep-penetration primer 5 L
Water-based acrylic deep-penetration primer for preparing concrete, plaster and drywall before finishing work. 5 L canister.
Spirit level 800 mm
Professional spirit level, 800 mm long, with three vials. Anodised aluminium body, accuracy 0.5 mm/m.
Cordless drill-driver 18 V
18 V cordless drill-driver with two 2 Ah Li-Ion batteries. Torque 45 N·m, 13 mm keyless chuck, charger and case included.
Brass ball valve 1/2" with butterfly handle
Brass 1/2" ball valve with a butterfly handle. Chrome-plated ball, PTFE seal, for water supply and heating systems.
Galvanised duct Ø125 mm
Spiral-wound ventilation duct made of galvanised steel, 125 mm diameter, 1.25 m long. For supply and exhaust ventilation indoors.
Galvanised chain-link mesh 50×50 mm, 1.5×10 m
Galvanised chain-link mesh with 50×50 mm cells and 1.6 mm wire. Roll 1.5×10 m for building fences, enclosures and reinforcement.