Multi-Monti P Anchor

The Multi-Monti P anchor is a steel fastener for installation into solid construction surfaces (brick walls, concrete slabs, etc.). In design it resembles an ordinary self-tapping screw: a cylindrical shank with cut threads ends in a slotted head. Multi-Monti P fasteners have a star-shaped TORX recess. This allows a substantial torque to be applied when installing the anchor without risk of damaging or stripping the recess. The anchor’s pointed thread effectively cuts a “path” through solid, dense material. To make driving easier, a couple of thread turns right at the tip have a characteristic serrated profile.

Applications

Steel Multi-Monti P anchors are used for installation in concrete and brick bases, assembling temporary fixings and scaffolding, mounting shelves, installing cable trays, etc.

• Installation requires a small pre-drilled “pilot” hole.
• When driven into the material, it does not create hazardous internal stresses, so this fastener can be placed at a short distance from each other and from the edge of the slab.
• The anchors come in standard sizes and are fully interchangeable. They can be reused after removal.
• The electrogalvanized anchor offers decent corrosion protection, but is recommended more for indoor work (or for temporary outdoor structures, such as scaffolding).

When selecting anchor sizes, refer to the reference tables.

• The calculated load carried by each anchor determines its thickness.
• The anchor’s embedment depth depends on the density of the material (for loose or hollow slabs, longer anchors should be selected).
• The recommended tightening torque of the fastener must be observed, otherwise the internal walls of the anchor hole channel will be damaged.
• It is important to account for the distance from the edge of the head to the surface of the material – if it is too large, meaning the anchor is not fully driven in, it may be pulled out of the hole under load.

FLOK supplies quality Multi-Monti P anchors – wholesale or retail.

Multi-Monti P metal anchor

Fastener SKU	Type	Drill diameter, mm	Min. embedment depth, mm	Max. thickness of the material being fastened mm	Head type/diameter	Package, pcs	Recommended load, kN (Concrete without cracks C20/25)*
71043	HMS-P 5 x 30	4	30	1	T-20 / 7.9 mm	500/3000	1.9
71044	HMS-P 6 x 30	5	30	1	T-30 / 11.6 mm	250/1500	1.9

• In accordance with the manufacturer’s recommendations