Multi-Monti F Metal Anchor

The Sormat Multi-Monti F metal anchor (MMS-F and HMS-F) is used for fastening products in concrete, solid brick and natural stone. The anchor is electro-galvanized, with a T-drive countersunk head.

The metal anchor provides secure fastening of structures in the base material: resistant to high pull-out loads, designed for long-term use. Thanks to the countersunk head, it is installed into the material without protruding above the surface, which gives the connection good decorative qualities and allows the fastener to be used in interior finishing.

Anchors of this type are used in construction and finishing work, installed in walls and floors/ceilings made of dense materials. The self-tapping fastener does not require pre-forming a thread in the hole or using additional elements.

SKU	Type	Anchor diameter mm	Anchor length mm	Max. thickness of the material being fastened mm	Drill diameter, mm	Min. embedment depth, mm	Bit size	Package, pcs
71045	HMS-F 6 x 10 x 40	6	40	10	5	30	T-30	200/2000
71046	MMS-F 6 x 5 x 50	6	50	5	5	45	T-30	100/1000
71048	MMS-F 6 x 35 x 80	6	80	35	5	45	T-30	50/500
71049	MMS-F 6 x 55 x 100	6	100	55	5	45	T-30	50/500
71053	MMS-F 7.5 x 5 x 50	7.5	50	5	6	45	T-40	100/1000
71055	MMS-F 7.5 x 25 x 80	7.5	80	25	6	55	T-40	100/1000
71056	MMS-F 7.5 x 45 x 100	7.5	100	45	6	55	T-40	50/500

Loads on Sormat Multi-Monti F metal anchors (MMS-F and HMS-F)

Type	Head type	Recommended load, kN (Concrete without cracks C20/25)*	Recommended load, kN (Concrete with cracks C20/25)*	Allowable load, kN (Concrete without cracks C20/25)**	Allowable load, kN (Concrete with cracks C20/25)**
HMS-F 6 x 10 x 40	HMS-F	1.9	-	-	-
MMS-F 6 x 5 x 50	MMS-F	3.8	2.7	1.5	0.3
MMS-F 6 x 35 x 80	MMS-F	3.8	2.7	1.5	0.3
MMS-F 6 x 55 x 100	MMS-F	3.8	2.7	1.5	0.3
MMS-F 7.5 x 5 x 50	MMS-F	3.7	-	2.0	0.5
MMS-F 7.5 x 25 x 80	MMS-F	5.3	3.8	3.1	2.1
MMS-F 7.5 x 45 x 100	MMS-F	5.3	3.8	3.1	2.1

• In accordance with the manufacturer’s recommendations

** In accordance with approved certifications