Embedded Anchor with Mounting Plate VASD
Embedded anchor with mounting plate VASD: design, installation in concrete, application, dimensions and materials. FLOK supplies this type of fastener.
The embedded anchor with mounting plate VASD is used for permanent installation in concrete structures. Embedded anchors carry significant loads and offer high reliability and durability. The VASD embedded anchor with mounting plate is a metal elongated sleeve with an internal thread. A mounting plate — a round plate with four holes — is attached to the front end of the sleeve. Combined with the central hole of the anchor sleeve, this “five-point” fastener allows heavy structures to be mounted reliably and conveniently.
Design features
A support rod (tie rod) is inserted on the back side of the anchor, perpendicular to the sleeve. It is designed to securely fix the fastener during installation. For this type of anchor, installation means embedding the fastener directly into the concrete mix before it sets. After the concrete hardens, it rigidly fixes the anchor, achieving high reliability and significant load capacity. Before installing the fastener, the exact location and number of anchor placement points must be known: once the concrete has hardened, the fastener cannot be removed or moved without destroying the slab.
Applications
Embedded anchors are used for the permanent fastening of heavy structures that do not need to be relocated throughout the service life of the facility. Such anchors are used to secure pipes and heating radiators, gas boilers, etc. Embedded anchors are simple to install, although they cannot be relocated afterward. Embedded anchors also offer reliability — their service life approaches that of the concrete structures themselves.
Such fasteners are typically made of metal. A steel anchor may have additional corrosion protection (galvanic zinc plating). The dimensions of anchors (diameter and length) depend on the weight of the structures they are installed for. Embedded anchors are placed flush with the concrete surface.
Embedded Anchor with Mounting Plate VASD
An embedded anchor is a fastener installed in the concrete mix before it sets. The product has an internal thread and can be equipped with additional elements — a tie rod and a flange (VASD). The fastener should be loaded only after the concrete has fully hardened.
| Tuote (mm) | kpl/pcs |
|---|---|
| 10x60 | 100 |
| 12x50 | 100 |
| 12x70 | 100 |
| 16x50 | 50 |
| 16x90 | 50 |
| 20x100 | 50 |
| 24x130 | 25 |
The cast-in anchor is made of zinc-plated and stainless steel.
Estimate for the “Embedded Anchor with Mounting Plate VASD” category
Send a specification or specify volumes — we will prepare a commercial proposal with timelines and payment terms within one business day.