Blind rivets
FLOK supplies multi-grip, heavy-duty, combination and sealed blind rivets in all sizes, made of stainless steel, copper, aluminium and zinc-plated steel.
A blind rivet is a fastener in the form of a cylindrical shaft with a head on one side. It is used to join sheet materials by mechanical deformation: the flattened shaft clamps both sides of the joint.
Why choose blind rivets
Blind rivets are easy to install and provide a reliable permanent joint. Installation requires a hand or pneumatic rivet gun. This type of fastener is widely used in automotive and shipbuilding, in the manufacture of machinery, machine tools and other equipment where sheet materials need to be joined securely. For more critical applications, such as aircraft manufacturing, a threaded variant of this fastener is used — it increases the strength and reliability of the joint.
Material of blind rivets
FLOK supplies blind rivets made of the following materials:
- Stainless steel A2 and A4
- Copper
- Aluminium
- Zinc-plated steel
When choosing fasteners, the composition of the sheet material to be joined must be carefully considered. There is a risk of forming a “galvanic pair,” which can lead to corrosion. For example, aluminium blind rivets are not suitable for steel surfaces: the non-ferrous metal can quickly oxidize and deform.
There are four types of blind rivets:
- Multi-grip
- Heavy-duty
- Combination
- Sealed
A pull-type blind rivet is a type of fastener used to achieve the tightest possible joint between several elements. It is a steel or aluminium shaft, one end of which is fitted with a special sleeve and washer. After being driven into the base material, it flattens and forms a rounded head matching the diameter of the hole.
A pull-type rivet differs from a bolt, self-tapping screw or machine screw in that it has no thread. The elements are joined by pre-drilling a hole sized to match the rivet diameter to ensure joint strength. The head may be exposed or countersunk, sitting flush with the outer surface.
Pull-type blind rivets are most often used by builders for work with metal, plasterboard and other materials. Installation is performed with a rivet gun. The fastener is inserted into the pre-drilled hole and pressed in by the washer. The end of the rivet is gripped by the tool and pulled, which crushes the sleeve and secures it to the base material.
Various types of steel, including corrosion-resistant grades, as well as aluminium alloys, are used to manufacture rivets. Aluminium rivets are not designed for high dynamic and vibration loads, but they withstand environmental exposure well.
FLOK supplies blind rivets across the full size range in any material.
Thickness of joined materials and hole diameter for combination blind rivet CO/ST, mm
| Rivet size | Thickness of materials being joined | Flange diameter | Hole diameter |
|---|---|---|---|
| 2.4×6 | 1.5 - 4.0 | 5.0 | 2.5 - 2.6 |
| 2.4×8 | 4.0 - 6.0 | ||
| 2.4×10 | 6.0 - 8.0 | ||
| 3.0 x 6 | 1.5 - 3.5 | 6.0 | 3.1 - 3.2 |
| 3.0 x 8 | 3.5 - 5.5 | ||
| 3.0 x 10 | 5.5 - 7.0 | ||
| 3.0 x 12 | 7.0 - 9.0 | ||
| 3.0 x 14 | 9.0 - 12.0 | ||
| 3.2 x 6 | 1.5 - 3.5 | 6.0 | 3.3 - 3.4 |
| 3.2 x 8 | 3.5 - 5.0 | ||
| 3.2 x 10 | 5.0 - 7.0 | ||
| 3.2 x 12 | 7.0 - 9.0 | ||
| 3.2 x 14 | 9.0 - 10.5 | ||
| 3.2 x 16 | 10.5 - 13.0 | ||
| 4.0 x 6 | 1.5 - 3.0 | 7.5 | 4.1 - 4.2 |
| 4.0 x 8 | 3.0 - 5.0 | ||
| 4.0 x 10 | 5.0 - 6.5 | ||
| 4.0 x 12 | 6.5 - 8.5 | ||
| 4.0 x 14 | 8.5 - 10.5 | ||
| 4.0 x 16 | 10.5 - 12.5 | ||
| 4.8 x 6 | 1.0 - 3.5 | 9.0 | 4.9 - 5.0 |
| 4.8 x 8 | 2.0 - 4.5 | ||
| 4.8 x 10 | 4.5 - 6.0 | ||
| 4.8 x 12 | 6.0 - 8.0 | ||
| 4.8 x 14 | 8.0 - 10.0 | ||
| 4.8 x 16 | 10.0 - 12.0 | ||
| 5.0 x 8 | 2.5 - 4.5 | 9.0 | 5.1 - 5.2 |
| 5.0 x 10 | 4.5 - 6.0 | ||
| 5.0 x 12 | 6.0 - 8.0 | ||
| 5.0 x 14 | 8.0 - 10.0 | ||
| 5.0 x 16 | 10.0 - 12.0 |
Thickness of joined materials and hole diameter for blind rivet A2/A2, mm
| Rivet size | Thickness of materials being joined | Flange diameter | Hole diameter |
|---|---|---|---|
| 3.2 x 8 | 3.5 - 5.0 | 9.5 | 3.3 - 3.4 |
| 3.2 x 10 | 5.0 - 7.0 | ||
| 3.2 x 12 | 7.0 - 9.0 | ||
| 3.2 x 14 | 9.0 - 11.0 | ||
| 3.2 x 16 | 11.0 - 13.0 | ||
| 12 | 4.1 - 4.2 | ||
| 4.0 x 8 | 3.0 - 5.0 | ||
| 4.0 x 10 | 5.0 - 6.5 | ||
| 4.0 x 12 | 6.5 - 8.5 | ||
| 4.0 x 14 | 8.5 - 10.5 | ||
| 4.0 x 16 | 10.5 - 12.5 | ||
| 4.8 x 8 | 1.0 - 4.5 | 16 | 4.9 - 5.0 |
| 4.8 x 10 | 4.5 - 6.0 | ||
| 4.8 x 12 | 6.0 - 8.0 | ||
| 4.8 x 14 | 8.0 - 10.0 | ||
| 4.8 x 16 | 10.0 - 12.0 | ||
| 4.8 x 18 | 12.0 - 14.0 | ||
| 4.8 x 20 | 14.0 - 16.0 | ||
| 4.8 x 22 | 16.0 - 18.0 | ||
| 4.8 x 25 | 18.0 - 21.0 |
Thickness of joined materials and hole diameter for closed-end blind rivet, mm
| Size | Thickness of materials being joined | Flange diameter | Hole diameter |
|---|---|---|---|
| 3.2 x 8 | 2.0 - 3.5 | 6.0 | 3.3+0.1 |
| 3.2 x 9.5 | 3.5 - 5.0 | ||
| 3.2×10.5 | 5.0 - 6.5 | ||
| 3.2 x 12 | 6.5 - 8.0 | ||
| 3.2 x 14 | 8.0 - 10.0 | ||
| 3.2 x 16 | 9.0 - 11.0 | ||
| 4.0 x 8 | 0.5 - 3.5 | 8.0 | 4.1+0.1 |
| 4.0 x 9.5 | 3.5 - 4.5 | ||
| 4.0 x 11 | 4.5 - 6.5 | ||
| 4.0 x 12.5 | 6.5 - 8.0 | ||
| 4.0 x 14 | 8.0 - 9.5 | ||
| 4.0 x 16 | 9.5 - 11.5 | ||
| 4.8 x 8 | 1.0 - 3.0 | 9.5 | 4.9+0.1 |
| 4.8 x 9.5 | 3.0 - 4.5 | ||
| 4.8 x 11 | 4.5 - 6.0 | ||
| 4.8 x 12.5 | 6.0 - 7.5 | ||
| 4.8 x 14 | 7.5 - 9.0 | ||
| 4.8 x 16 | 9.0 - 11.0 | ||
| 4.8 x 18 | 11.0 - 13.0 | ||
| 4.8 x 21 | 13.0 - 16.0 | ||
| 4.8 x 25 | 16.0 - 20.0 |
Thickness of joined materials and hole size for copper blind rivet, mm
| Rivet size | Thickness of materials being joined | Flange diameter | Hole diameter |
|---|---|---|---|
| 3.0 x 6 | 1.5 - 3.5 | 6.5 | 3.1 - 3.2 |
| 3.0 x 8 | 3.5 - 5.5 | ||
| 3.0 x 10 | 5.5 - 7.0 | ||
| 3.0 x 12 | 7.0 - 9.0 | ||
| 3.0 x 14 | 9.0 - 11.0 | ||
| 3.0 x 16 | 11.0 - 13.0 | ||
| 3.0 x 18 | 13.0 - 15.0 | ||
| 3.0 x 20 | 15.0 - 17.0 | ||
| 3.2 x 6 | 1.5 - 3.5 | 6.5 | 3.3 - 3.4 |
| 3.2 x 8 | 3.5 - 5.0 | ||
| 3.2 x 10 | 5.0 - 7.0 | ||
| 3.2 x 12 | 7.0 - 9.0 | ||
| 3.2 x 14 | 9.0 - 11.0 | ||
| 3.2 x 16 | 11.0 - 13.0 | ||
| 3.2 x 18 | 13.0 - 15.0 | ||
| 3.2 x 20 | 15.0 - 17.0 | ||
| 3.2 x 25 | 20.0 - 22.0 | ||
| 4.0 x 6 | 1.5 - 3.0 | 8.0 | 4.1 - 4.2 |
| 4.0 x 8 | 3.0 - 5.0 | ||
| 4.0 x 10 | 5.0 - 6.5 | ||
| 4.0 x 12 | 6.5 - 8.5 | ||
| 4.0 x 14 | 8.5 - 10.5 | ||
| 4.0 x 16 | 10.5 - 12.5 | ||
| 4.0 x 18 | 12.5 - 14.5 | ||
| 4.0 x 20 | 14.5 - 16.5 | ||
| 4.0 x 22 | 16.5 - 18.0 | ||
| 4.0 x 25 | 18.0 - 21.5 | ||
| 4.0 x 26 | 18.5 - 22.5 | ||
| 4.0 x 28 | 21.5 - 24.0 | ||
| 4.0 x 30 | 21.5 - 26.0 | ||
| 4.8 x 6 | 1.0 - 3.0 | 9.5 | 4.9 - 5.0 |
| 4.8 x 8 | 3.0 - 4.5 | ||
| 4.8 x 10 | 4.5 - 6.0 | ||
| 4.8 x 12 | 6.0 - 8.0 | ||
| 4.8 x 14 | 8.0 - 10.0 | ||
| 4.8 x 16 | 10.0 - 12.0 | ||
| 4.8 x 18 | 12.0 - 14.0 | ||
| 4.8 x 20 | 14.0 - 16.0 | ||
| 4.8 x 22 | 16.0 - 18.0 | ||
| 4.8 x 23 | 16.5 - 19.0 | ||
| 4.8 x 24 | 17.0 - 20.0 | ||
| 4.8 x 25 | 18.0 - 21.0 | ||
| 4.8 x 28 | 21.0 - 23.5 | ||
| 4.8 x 30 | 23.0 - 25.0 | ||
| 4.8 x 32 | 25.0 - 27.0 | ||
| 4.8 x 35 | 25.0 - 30.0 | ||
| 4.8 x 40 | 30.0 - 35.0 | ||
| 4.8 x 50 | 40.0 - 45.0 | ||
| 5.0 x 6 | 0.5 - 2.5 | 9.5 | 5.1 - 5.2 |
| 5.0 x 8 | 2.5 - 4.5 | ||
| 5.0 x 10 | 4.5 - 6.0 | ||
| 5.0 x 12 | 6.0 - 8.0 | ||
| 5.0 x 14 | 8.0 - 10.0 | ||
| 5.0 x 16 | 10.0 - 12.0 | ||
| 5.0 x 18 | 12.0 - 14.0 | ||
| 5.0 x 21 | 14.0 - 17.0 | ||
| 5.0 x 25 | 17.0 - 20.0 | ||
| 5.0 x 27 | 20.0 - 23.0 | ||
| 5.0 x 30 | 23.0 - 25.0 | ||
| 6.0 x 8 | 2.0 - 4.0 | 12.0 | 6.1 - 6.2 |
| 6.0 x 10 | 4.0 - 6.0 | ||
| 6.0 x 12 | 6.0 - 8.0 | ||
| 6.0 x 14 | 7.0 - 9.0 | ||
| 6.0 x 16 | 9.0 - 11.0 | ||
| 6.0 x 18 | 11.0 - 13.0 | ||
| 6.0 x 22 | 13.0 - 17.0 | ||
| 6.0 x 26 | 17.0 - 20.0 | ||
| 6.0 x 30 | 20.0 - 24.0 | ||
| 6.4 x 8 | 2.0 - 4.0 | 13.0 | 6.5 - 6.6 |
| 6.4 x 10 | 2.0 - 5.0 | ||
| 6.4 x 12 | 4.0 - 6.0 | ||
| 6.4 x 14 | 6.0 - 8.0 | ||
| 6.4 x 16 | 8.0 - 11.0 | ||
| 6.4 x 18 | 9.0 - 13.0 | ||
| 6.4 x 20 | 11.0 - 15.0 | ||
| 6.4 x 22 | 13.0 - 16.0 | ||
| 6.4 x 25 | 15.0 - 19.0 | ||
| 6.4 x 26 | 16.0 - 20.0 | ||
| 6.4 x 28 | 17.0 - 22.0 | ||
| 6.4 x 30 | 18.0 - 24.0 | ||
| 6.4 x 32 | 22.0 - 26.0 | ||
| 6.4 x 35 | 24.0 - 30.0 | ||
| 6.4 x 40 | 30.0 - 35.0 | ||
| 6.4 x 45 | 35.0 - 40.0 |
| Size | Thickness of materials being joined | Flange diameter | Hole diameter |
|---|---|---|---|
| 3.2 x 8 | 2.0 - 3.5 | 6.0 | 3.3+0.1 |
| 3.2 x 9.5 | 3.5 - 5.0 | ||
| 3.2×10.5 | 5.0 - 6.5 | ||
| 3.2 x 12 | 6.5 - 8.0 | ||
| 3.2 x 14 | 8.0 - 10.0 | ||
| 3.2 x 16 | 9.0 - 11.0 | ||
| 4.0 x 8 | 0.5 - 3.5 | 8.0 | 4.1+0.1 |
| 4.0 x 9.5 | 3.5 - 4.5 | ||
| 4.0 x 11 | 4.5 - 6.5 | ||
| 4.0 x 12.5 | 6.5 - 8.0 | ||
| 4.0 x 14 | 8.0 - 9.5 | ||
| 4.0 x 16 | 9.5 - 11.5 | ||
| 4.8 x 8 | 1.0 - 3.0 | 9.5 | 4.9+0.1 |
| 4.8 x 9.5 | 3.0 - 4.5 | ||
| 4.8 x 11 | 4.5 - 6.0 | ||
| 4.8 x 12.5 | 6.0 - 7.5 | ||
| 4.8 x 14 | 7.5 - 9.0 | ||
| 4.8 x 16 | 9.0 - 11.0 | ||
| 4.8 x 18 | 11.0 - 13.0 | ||
| 4.8 x 21 | 13.0 - 16.0 | ||
| 4.8 x 25 | 16.0 - 20.0 |
| Size | d | dk | K | R max | d1 | L1 | Tensile force N | Shear force N |
|---|---|---|---|---|---|---|---|---|
| 3.2 | 3.2 +0.08-0.10 | 9.5 +0.3-0.7 | 2 ±0.2 | 0.2 | 1.70 | 27 | 1285 | 1060 |
| 4.0 | 4.0 +0.08-0.15 | 12.0 +0.5-1.0 | 2.5 ±0.3 | 0.3 | 2.10 | 27 | 1990 | 1550 |
| 4.8 | 4.8 +0.08-0.15 | 16.0 -1.0 | 2.5 ±0.3 | 0.3 | 2.70 | 27 | 2920 | 2300 |
| Size | Thickness of materials being joined | Flange diameter | Hole diameter |
|---|---|---|---|
| 3.2 x 8 | 3.5 - 5.0 | 9.5 | 3.3 - 3.4 |
| 3.2 x 10 | 5.0 - 7.0 | ||
| 3.2 x 12 | 7.0 - 9.0 | ||
| 3.2 x 14 | 9.0 - 11.0 | ||
| 3.2 x 16 | 11.0 - 13.0 | ||
| 4.0 x 8 | 3.0 - 5.0 | 12 | 4.1 - 4.2 |
| 4.0 x 10 | 5.0 - 6.5 | ||
| 4.0 x 12 | 6.5 - 8.5 | ||
| 4.0 x 14 | 8.5 - 10.5 | ||
| 4.0 x 16 | 10.5 - 12.5 | ||
| 4.8 x 8 | 1.0 - 4.5 | 16 | 4.9 - 5.0 |
| 4.8 x 10 | 4.5 - 6.0 | ||
| 4.8 x 12 | 6.0 - 8.0 | ||
| 4.8 x 14 | 8.0 - 10.0 | ||
| 4.8 x 16 | 10.0 - 12.0 | ||
| 4.8 x 18 | 12.0 - 14.0 | ||
| 4.8 x 20 | 14.0 - 16.0 | ||
| 4.8 x 22 | 16.0 - 18.0 | ||
| 4.8 x 25 | 18.0 - 21.0 |
| Size | d | dk | K | R max | d1 | L1 | Tensile force N | Shear force N |
|---|---|---|---|---|---|---|---|---|
| 3.0 | 3.0 +0.08-0.10 | 6.5 -0.7 | 0.8 ±0.2 | 0.2 | 1.90 | 27 | 2000 | 1600 |
| 3.2 | 3.2 +0.08-0.10 | 6.5 -0.7 | 0.8 ±0.2 | 0.2 | 2.00 | 27 | 2500 | 1800 |
| 4.0 | 4.0 +0.08-0.15 | 8.0 -1.0 | 1.0 ±0.3 | 0.3 | 2.50 | 27 | 3800 | 3100 |
| 4.8 | 4.8 +0.08-0.15 | 9.5 -1.0 | 1.1 ±0.3 | 0.3 | 2.90 | 27 | 6000 | 4500 |
| 5.0 | 5.0 +0.08-0.15 | 9.5 -1.0 | 1.1 ±0.3 | 0.3 | 2.90 | 27 | 6500 | 5000 |
| 6.0 | 6.0 +0.08-0.15 | 12.0 -1.5 | 1.5 ±0.4 | 0.4 | 3.60 | 27 | 8850 | 6500 |
| 6.4 | 6.4 +0.08-0.15 | 13 -1.5 | 1.8 ±0.4 | 0.5 | 3.85 | 27 | 8850 | 6500 |
| Rivet size | Thickness of materials being joined | Flange diameter | Hole diameter |
|---|---|---|---|
| 3.0 x 6 | 1.5 - 3.5 | 6.5 | 3.1 - 3.2 |
| 3.0 x 8 | 3.5 - 5.5 | ||
| 3.0 x 10 | 5.5 - 7.0 | ||
| 3.0 x 12 | 7.0 - 9.0 | ||
| 3.0 x 14 | 9.0 - 11.0 | ||
| 3.0 x 16 | 11.0 - 13.0 | ||
| 3.0 x 18 | 13.0 - 15.0 | ||
| 3.0 x 20 | 15.0 - 17.0 | ||
| 3.2 x 6 | 1.5 - 3.5 | 6.5 | 3.3 - 3.4 |
| 3.2 x 8 | 3.5 - 5.0 | ||
| 3.2 x 10 | 5.0 - 7.0 | ||
| 3.2 x 12 | 7.0 - 9.0 | ||
| 3.2 x 14 | 9.0 - 11.0 | ||
| 3.2 x 16 | 11.0 - 13.0 | ||
| 3.2 x 18 | 13.0 - 15.0 | ||
| 3.2 x 20 | 15.0 - 17.0 | ||
| 3.2 x 25 | 20.0 - 22.0 | ||
| 4.0 x 6 | 1.5 - 3.0 | 8.0 | 4.1 - 4.2 |
| 4.0 x 8 | 3.0 - 5.0 | ||
| 4.0 x 10 | 5.0 - 6.5 | ||
| 4.0 x 12 | 6.5 - 8.5 | ||
| 4.0 x 14 | 8.5 - 10.5 | ||
| 4.0 x 16 | 10.5 - 12.5 | ||
| 4.0 x 18 | 12.5 - 14.5 | ||
| 4.0 x 20 | 14.5 - 16.5 | ||
| 4.0 x 22 | 16.5 - 18.0 | ||
| 4.0 x 25 | 18.0 - 21.5 | ||
| 4.0 x 26 | 18.5 - 22.5 | ||
| 4.0 x 28 | 21.5 - 24.0 | ||
| 4.0 x 30 | 21.5 - 26.0 | ||
| 4.8 x 6 | 1.0 - 3.0 | 9.5 | 4.9 - 5.0 |
| 4.8 x 8 | 3.0 - 4.5 | ||
| 4.8 x 10 | 4.5 - 6.0 | ||
| 4.8 x 12 | 6.0 - 8.0 | ||
| 4.8 x 14 | 8.0 - 10.0 | ||
| 4.8 x 16 | 10.0 - 12.0 | ||
| 4.8 x 18 | 12.0 - 14.0 | ||
| 4.8 x 20 | 14.0 - 16.0 | ||
| 4.8 x 22 | 16.0 - 18.0 | ||
| 4.8 x 23 | 16.5 - 19.0 | ||
| 4.8 x 24 | 17.0 - 20.0 | ||
| 4.8 x 25 | 18.0 - 21.0 | ||
| 4.8 x 28 | 21.0 - 23.5 | ||
| 4.8 x 30 | 23.0 - 25.0 | ||
| 4.8 x 32 | 25.0 - 27.0 | ||
| 4.8 x 35 | 25.0 - 30.0 | ||
| 4.8 x 40 | 30.0 - 35.0 | ||
| 4.8 x 50 | 40.0 - 45.0 | ||
| 5.0 x 6 | 0.5 - 2.5 | 9.5 | 5.1 - 5.2 |
| 5.0 x 8 | 2.5 - 4.5 | ||
| 5.0 x 10 | 4.5 - 6.0 | ||
| 5.0 x 12 | 6.0 - 8.0 | ||
| 5.0 x 14 | 8.0 - 10.0 | ||
| 5.0 x 16 | 10.0 - 12.0 | ||
| 5.0 x 18 | 12.0 - 14.0 | ||
| 5.0 x 21 | 14.0 - 17.0 | ||
| 5.0 x 25 | 17.0 - 20.0 | ||
| 5.0 x 27 | 20.0 - 23.0 | ||
| 5.0 x 30 | 23.0 - 25.0 | ||
| 6.0 x 8 | 2.0 - 4.0 | 12.0 | 6.1 - 6.2 |
| 6.0 x 10 | 4.0 - 6.0 | ||
| 6.0 x 12 | 6.0 - 8.0 | ||
| 6.0 x 14 | 7.0 - 9.0 | ||
| 6.0 x 16 | 9.0 - 11.0 | ||
| 6.0 x 18 | 11.0 - 13.0 | ||
| 6.0 x 22 | 13.0 - 17.0 | ||
| 6.0 x 26 | 17.0 - 20.0 | ||
| 6.0 x 30 | 20.0 - 24.0 | ||
| 6.4 x 8 | 2.0 - 4.0 | 13.0 | 6.5 - 6.6 |
| 6.4 x 10 | 2.0 - 5.0 | ||
| 6.4 x 12 | 4.0 - 6.0 | ||
| 6.4 x 14 | 6.0 - 8.0 | ||
| 6.4 x 16 | 8.0 - 11.0 | ||
| 6.4 x 18 | 9.0 - 13.0 | ||
| 6.4 x 20 | 11.0 - 15.0 | ||
| 6.4 x 22 | 13.0 - 16.0 | ||
| 6.4 x 25 | 15.0 - 19.0 | ||
| 6.4 x 26 | 16.0 - 20.0 | ||
| 6.4 x 28 | 17.0 - 22.0 | ||
| 6.4 x 30 | 18.0 - 24.0 | ||
| 6.4 x 32 | 22.0 - 26.0 | ||
| 6.4 x 35 | 24.0 - 30.0 | ||
| 6.4 x 40 | 30.0 - 35.0 | ||
| 6.4 x 45 | 35.0 - 40.0 |
| Rivet size | Thickness of parts, sheets joined | Flange diameter | Hole diameter |
|---|---|---|---|
| 3.2 x 8 | 3.5 - 5.0 | 9.5 | 3.3 - 3.4 |
| 3.2 x 10 | 5.0 - 7.0 | ||
| 3.2 x 12 | 7.0 - 9.0 | ||
| 3.2 x 14 | 9.0 - 11.0 | ||
| 3.2 x 16 | 11.0 - 13.0 | ||
| 12 | 4.1 - 4.2 | ||
| 4.0 x 8 | 3.0 - 5.0 | ||
| 4.0 x 10 | 5.0 - 6.5 | ||
| 4.0 x 12 | 6.5 - 8.5 | ||
| 4.0 x 14 | 8.5 - 10.5 | ||
| 4.0 x 16 | 10.5 - 12.5 | ||
| 4.8 x 8 | 1.0 - 4.5 | 16 | 4.9 - 5.0 |
| 4.8 x 10 | 4.5 - 6.0 | ||
| 4.8 x 12 | 6.0 - 8.0 | ||
| 4.8 x 14 | 8.0 - 10.0 | ||
| 4.8 x 16 | 10.0 - 12.0 | ||
| 4.8 x 18 | 12.0 - 14.0 | ||
| 4.8 x 20 | 14.0 - 16.0 | ||
| 4.8 x 22 | 16.0 - 18.0 | ||
| 4.8 x 25 | 18.0 - 21.0 |
| Rivet diameter d | 2.4 | 3 | 3.2 | 4 | 4.8 | 5 | 6 | 6.4 |
|---|---|---|---|---|---|---|---|---|
| Flange diameter d₂ | 5 | 6.5 | 6.5 | 8 | 9.5 | 9.5 | 12 | 13 |
| Flange height k | 0.65 | 1.0 | 1.0 | 1.2 | 1.3 | 1.3 | 1.5 | 1.8 |
| Hole diameter | 2.5 | 3.1 | 3.3 | 4.1 | 4.9 | 5.1 | 6.1 | 6.5 |
| Body length L | Thickness of joined materials (min. - max.) | |||||||
| 4 | 0.5-1.5 | 0.5-1.5 | 0.5-1.5 | - | - | - | - | - |
| 5 | - | 1.5-2.5 | - | 0.5-1.5 | - | - | - | - |
| 6 | 1.5-3.5 | 2.5-3.5 | 1.5-3.5 | 1.5-3.0 | 2.0-2.5 | 2.0-2.5 | - | - |
| 8 | 3.5-5.0 | 4.5-5.0 | 3.5-5.0 | 4.0-5.0 | 2.5-4.5 | 2.5-4.5 | 2.0-3.0 | - |
| 10 | - | 5.0-7.0 | 5.0-7.0 | 5.0-6.5 | 4.5-6.0 | 4.5-6.0 | 3.0-5.0 | - |
| 12 | - | 7.0-9.0 | 7.0-9.0 | 6.5-8.5 | 6.0-8.0 | 6.0-8.0 | 5.0-7.0 | 2.0-6.0 |
| 14 | - | 9.0-11.0 | 9.0-11.0 | 8.5-10.5 | 8.0-10.0 | 8.0-10.0 | - | - |
| 16 | - | 11.0-13.0 | 11.0-13.0 | 10.5-12.5 | 10.0-12.0 | 10.0-12.0 | 7.0-11.0 | 6.0-10.0 |
| 18 | - | 13.0-15.0 | 13.0-15.0 | 10.5-12.5 | 12.0-14.0 | 12.0-14.0 | 11.0-13.0 | 10.0-12.0 |
| 20 | - | 15.0-17.0 | 15.0-17.0 | 14.5-16.5 | 14.0-15.0 | 14.0-15.0 | 13.0-15.0 | 12.0-14.0 |
| 25 | - | 17.0-22.0 | 17.0-22.0 | 16.5-21.5 | 15.0-20.0 | 15.0-20.0 | 15.0-20.0 | 14.0-18.0 |
| 30 | - | 22.0-26.0 | - | 21.5-26.0 | 20.0-25.0 | 20.0-25.0 | 20.0-24.0 | 18.0-23.0 |
| 35 | - | - | - | 26.0-30.0 | - | 25.0-30.0 | 24.0-29.0 | - |
| 40 | - | - | - | 30.0-35.0 | - | 30.0-35.0 | 29.0-34.0 | - |
| 45 | - | - | - | - | - | 35.0-40.0 | - | - |
| 50 | - | - | - | - | - | 40.0-45.0 | 34.0-44.0 | - |
| 60 | - | - | - | - | - | 48.0-52.0 | - | - |
| 65 | - | - | - | - | - | 52.0-57.0 | - | - |
| 70 | - | - | - | - | - | 57.0-62.0 | - | - |
| 80 | - | - | - | - | - | 62.0-72.0 | - | - |
| Rivet diameter d | 2.4 | 3 | 3.2 | 4 | 4.8 | 5 | 6 | 6.4 |
|---|---|---|---|---|---|---|---|---|
| Rivet material | Rivet shear strength (tensile), N | |||||||
| Aluminium alloy (ISO 15977) | 350 (550) | 550 (850) | 750 (1100) | 1250 (1800) | 1850 (2600) | 2150 (3100) | 3200 (4600) | 3400 (4850) |
| Steel (ISO 15979) | 650 (700) | 950 (1100) | 1100 (1200) | 1700 (2200) | 2900 (3100) | 3100 (4000) | 4300 (4800) | 4900 (5700) |
| Stainless steel A2, A4 (ISO 15983) | - | 1800 (2200) | 1900 (2500) | 2700 (3500) | 4000 (5000) | 4700 (5800) | - | - |
| Copper (ISO 16582) | - | 760 (950) | 800 (1000) | 1500 (1800) | 2000 (2500) | - | - | - |
| Copper-nickel alloy - Monel (ISO 16584) | - | - | 1400 (1900) | 2200 (3000) | 3300 (3700) | - | - | 5500 (6800) |
Sections
- 01
Stainless Steel Blind Rivet with Standard Flange
A2 stainless blind rivets with a standard-diameter flange join thin sheet metal from one side.
- 02
Colored Blind Rivet Painted RAL
Colored RAL blind rivets with painted aluminium body and steel mandrel for joining sheet materials and roofing.
- 03
Blind Rivet with Countersunk Flange
Blind rivets with countersunk flange for sheet metal, in steel, stainless steel, aluminium or combined design.
- 04
Countersunk Blind Rivet
FLOK supplies countersunk blind rivets for thin sheet metal: steel, aluminium and combined, wide size range, made to order, wholesale.
- 05
Blind Rivet with Large Flange
Blind rivets with large flange for permanently joining sheet metal 1.5–35 mm thick.
- 06
Aluminium Blind Rivet with Standard Flange
Aluminium blind rivet with standard flange for joining thin metal sheets.
- 07
DIN 7337 Blind Rivet
FLOK supplies DIN 7337 blind rivets made of aluminium, zinc-plated steel, and stainless steel.
- 08
Peel-Type Blind Rivet
Peel-type blind rivet with aluminium body and steel mandrel, diameter 4 or 4.8 mm, length 8–20 mm.
- 09
Blind Rivet with Standard Flange
Blind rivets with standard flange for joining soft sheet materials: plastic, gypsum board, and wood-based materials.
- 10
Plastic Blind Rivet for Rivet Gun
FLOK supplies plastic blind rivets sized from 4×8 to 6×12 mm for fastening soft and brittle materials in construction and industry.
- 11
Expansion Blind Rivet
FLOK supplies vibration-resistant expansion blind rivets wholesale in any batch size for joining metal, plastic, plasterboard and wood-based panels.
- 12
Blind Rivet with Standard Flange
Blind rivet with standard flange for permanent joints in thin sheet parts.
- 13
Combined blind rivet with countersunk head
Combined blind rivet with countersunk head: steel sleeve, aluminium mandrel, zinc coating.
- 14
Wide-Flange Blind Rivet
Wide-flange blind rivets made of steel and aluminium for sheet materials, facades and industrial equipment.
- 15
Blind rivet, combined, large flange
FLOK supplies combined blind rivets with large flange for thin-sheet metal 1.5–45 mm thick, aluminium, copper, steel A2/St.
- 16
Combined rivet with extended flange for joining parts and sheet metal
Combined rivet with extended flange for joining sheet metal.
- 17
Blind Rivet with Standard Flange
Blind rivets with standard flange for leak-tight joining of thin sheet material.
- 18
Blind Combination Pull Rivet with Standard Flange
Blind combination pull rivet with standard flange: sealed joints in sheet material 1–25 mm thick.
- 19
Reinforced Aluminium Blind Rivet with Standard Collar
Reinforced aluminium blind rivet with a standard collar for permanent thin-sheet metal joints, corrosion-resistant in humid environments.
- 20
10 mm heavy-duty steel blind rivet with standard flange
10 mm heavy-duty steel blind rivet with standard flange for strong permanent joints of thin sheet parts.
- 21
Heavy-Duty Blind Rivet with Countersunk Head
Heavy-duty blind rivets with countersunk head in St steel or aluminium-magnesium alloy.
- 22
Heavy-Duty Steel Blind Rivet with Countersunk Flange
Heavy-duty steel blind rivets with countersunk flange, 4.8 and 6.4 mm, tensile strength 5.4–10.1 kN.
- 23
Heavy-Duty Blind Rivets with Countersunk Head
FLOK supplies heavy-duty blind rivets with countersunk head made of steel and aluminium-magnesium alloy for joining sheet materials in wholesale lots.
- 24
Ribbed Rivet for Blind Holes, Timber, Wood
Ribbed-body rivets for blind holes and wood products give a tight, non-rotating joint.
- 25
Blind Rivet (Closed Type)
Closed-type blind rivet for sealed permanent joints in thin-gauge sheet metal, sizes 3.2×8–4.8×25 mm.
- 26
Sealed Blind Rivet
FLOK supplies sealed blind rivets in various sizes and materials for sealed joints of sheet materials in machine building and construction.
- 27
Flat multi-grip blind rivet
Flat multi-grip blind rivet made of carbon or stainless steel, plain or zinc-plated.
See also
Estimate for the “Blind rivets” category
Send a specification or specify volumes — we will prepare a commercial proposal with timelines and payment terms within one business day.