Combined rivet with extended flange for joining parts and sheet metal

The combined rivet with extended flange is designed for a strong, permanent joint of sheet material. Riveted joints are used instead of welded seams where access to the joint area is from one side only.

Thanks to the extended flange, the rivet has a larger contact area — the load on the material is distributed evenly.

Thickness of the sheets being joined ranges from 1 to 21 mm, depending on the flange diameter and mandrel length. The rivet body is made of copper, the mandrel of stainless steel. Installation is performed with a rivet gun.

Rivet size	Thickness of parts, sheets joined	Flange diameter	Hole diameter
3.2 x 8	3.5 - 5.0	9.5	3.3 - 3.4
3.2 x 10	5.0 - 7.0
3.2 x 12	7.0 - 9.0
3.2 x 14	9.0 - 11.0
3.2 x 16	11.0 - 13.0
		12	4.1 - 4.2
4.0 x 8	3.0 - 5.0
4.0 x 10	5.0 - 6.5
4.0 x 12	6.5 - 8.5
4.0 x 14	8.5 - 10.5
4.0 x 16	10.5 - 12.5
4.8 x 8	1.0 - 4.5	16	4.9 - 5.0
4.8 x 10	4.5 - 6.0
4.8 x 12	6.0 - 8.0
4.8 x 14	8.0 - 10.0
4.8 x 16	10.0 - 12.0
4.8 x 18	12.0 - 14.0
4.8 x 20	14.0 - 16.0
4.8 x 22	16.0 - 18.0
4.8 x 25	18.0 - 21.0