Blind Rivet with Standard Flange

The blind rivet with standard flange is used for leak-tight, permanent joining of thin sheet material. A riveted joint serves as an alternative to a weld seam where only one-sided access to the joint is available. The use of blind rivets provides protection against dust and moisture ingress.

The thickness of the sheets being joined ranges from 0.5 to 20 mm depending on the flange diameter and rod length. The rivet body is made of aluminium or copper, the rod — of stainless (A2) or alloy (St) steel. Installation is performed with a hand rivet gun.

Size	Thickness of materials being joined	Flange diameter	Hole diameter
3.2 x 8	2.0 - 3.5	6.0	3.3+0.1
3.2 x 9.5	3.5 - 5.0
3.2×10.5	5.0 - 6.5
3.2 x 12	6.5 - 8.0
3.2 x 14	8.0 - 10.0
3.2 x 16	9.0 - 11.0
4.0 x 8	0.5 - 3.5	8.0	4.1+0.1
4.0 x 9.5	3.5 - 4.5
4.0 x 11	4.5 - 6.5
4.0 x 12.5	6.5 - 8.0
4.0 x 14	8.0 - 9.5
4.0 x 16	9.5 - 11.5
4.8 x 8	1.0 - 3.0	9.5	4.9+0.1
4.8 x 9.5	3.0 - 4.5
4.8 x 11	4.5 - 6.0
4.8 x 12.5	6.0 - 7.5
4.8 x 14	7.5 - 9.0
4.8 x 16	9.0 - 11.0
4.8 x 18	11.0 - 13.0
4.8 x 21	13.0 - 16.0
4.8 x 25	16.0 - 20.0