Stainless Steel Blind Rivet with Standard Flange

Blind rivets with a standard-diameter flange join parts made of thin sheet metal when access to the joint is only possible from one side.

The rivet body is inserted into a pre-drilled hole of the required diameter and secured by pulling the metal mandrel with a rivet gun. The resulting joint is strong and permanent.

The products are made of A2 stainless steel. The material is corrosion-resistant and suitable for conditions of constant exposure to moisture or aggressive environments.

Size Thickness of materials joined Collar diameter Hole diameter
2.4×6	1.5 - 4.0	5.0	2.5 - 2.6
2.4×8	4.0 - 6.0
2.4×10	6.0 - 8.0
3.0 x 6	1.5 - 3.5	6.0	3.1 - 3.2
3.0 x 8	3.5 - 5.5
3.0 x 10	5.5 - 7.0
3.0 x 12	7.0 - 9.0
3.0 x 14	9.0 - 12.0
3.2 x 6	1.5 - 3.5	6.0	3.3 - 3.4
3.2 x 8	3.5 - 5.0
3.2 x 10	5.0 - 7.0
3.2 x 12	7.0 - 9.0
3.2 x 14	9.0 - 10.5
3.2 x 16	10.5 - 13.0
4.0 x 6	1.5 - 3.0	7.5	4.1 - 4.2
4.0 x 8	3.0 - 5.0
4.0 x 10	5.0 - 6.5
4.0 x 12	6.5 - 8.5
4.0 x 14	8.5 - 10.5
4.0 x 16	10.5 - 12.5
4.8 x 6	1.0 - 3.5	9.0	4.9 - 5.0
4.8 x 8	2.0 - 4.5
4.8 x 10	4.5 - 6.0
4.8 x 12	6.0 - 8.0
4.8 x 14	8.0 - 10.0
4.8 x 16	10.0 - 12.0
5.0 x 8	2.5 - 4.5	9.0	5.1 - 5.2
5.0 x 10	4.5 - 6.0
5.0 x 12	6.0 - 8.0
5.0 x 14	8.0 - 10.0
5.0 x 16	10.0 - 12.0