MULTI-MONTI torx anchor

DIN 479. Set screw with square head and collar, with short cylindrical end. Materials: steel, property class 8.8, 10.9.

MULTI-MONTI TORX anchors are made of steel with a zinc coating for corrosion protection, which allows their use in high-load structures and outdoors. The anchor diameter and embedment depth are selected using reference load tables, taking into account the load on the fastener and the base material type — solid concrete, hollow, or loose material. For anchors installed vertically, the embedment requirements are stricter.

The use of the TORX recess is justified from several points of view

• The TORX recess was developed for fasteners whose tightening requires high torque: in this case, a slot or cross recess strips easily, while a hex socket requires enlarging the bolt head to accommodate it.
• The limited availability of TORX driving tools reduces the risk of unauthorized loosening — this is important for anchors carrying significant weight of attached structures, especially for outdoor use.
• The bit fits into the TORX recess with an interference fit, so when working with powerful tools (which are exactly the type of driver required for driving anchors into hard concrete or stone bases), there is no play or anchor misalignment, which simplifies installation and improves installation quality.

FLOK supplies MULTI-MONTI torx anchors wholesale and retail.

MULTI-MONTI torx anchor

The MULTI-MONTI metal concrete anchor (countersunk head) is made of high-strength stainless steel.

Tuote (mm)	Spanner size	kpl/pcs
HMS-F 6x10x40	T-30	200/2000
MMS-F 6x5x50	T-30	100/1000
MMS-F 6x35x80	T-30	50/500
MMS-F 6x55x100	T-30	50/500
MMS-F 7.5x5x50	T-40	100/1000
MMS-F 7.5x25x80	T-40	100/1000
MMS-F 7.5x45x100	T-40	50/500