PDK Lifting Clamps
PDK eccentric lifting clamps for moving stacks of sheet metal up to 240 mm thick, with a pair load capacity over 8 tonnes, supplied by FLOK.
PDK lifting clamps are a rigging component for lifting a stack of metal sheets and moving it in any plane. Suitable for transporting sheets stacked together.
Design features
The PDK lifting clamp is a design with an eccentric grip. The mechanism includes a gripping arm that creates load on the surface and secures the jaw. The grip models are rated for thicknesses up to 240 millimeters.
PDK lifting clamps work in pairs. The combined load capacity of a pair of sets exceeds 8 tonnes.
Operation
PDK lifting clamps are used as the main component for transporting metal sheet packs in production or industrial settings. The mechanism is fitted with a spring clamp, allowing flexible adjustment of the component. For adapting to a crane, it is used together with SI-type rigging shackles. During transport, an even number of clamps must be used, at least 2.
Marking and selection
Manufacturers mark the products according to the load capacity rated for a pair of clamps, jaw width, and product weight.
The choice depends on the required load capacity for production or operational use. Operation is governed by GOST standards.
Estimate for the “PDK Lifting Clamps” category
Send a specification or specify volumes — we will prepare a commercial proposal with timelines and payment terms within one business day.