Drywall Self-Tapping Screw with Fine Thread and Drill Bit Tip
Drywall self-tapping screw with fine thread, drill-point tip, countersunk head and phosphate coating for metal profile up to 0.9 mm. FLOK supplies it.
This type of drywall self-tapping screw features fine thread and a drill-point tip. The cone-shaped head with a flat top allows the fastener to sink in better, keeps it less visible, and ensures a tighter fit of the drywall board against the frame elements. This type of head is called countersunk. Fine thread is required for working with metal, so these screws are used to fasten drywall panels to a frame made of metal profiles with a wall thickness of up to 0.9 mm. The drill bit at the tip of the shank eliminates the need for installers to pre-drill holes.
The cross recess makes the screw easy to drive in with either hand or power tools. Drywall self-tapping screws with fine thread and a drill bit tip are made of carbon steel. Rust protection is provided by a phosphate coating, which also helps the fastener interact more tightly with the materials being joined and the finishing putty layer.
FLOK supplies high-quality fasteners from well-known manufacturers.
| L (mm) | d |
|---|---|
| 25 | |
| 35 | |
| 45 | |
| 55 |
See also
-
Coarse-thread Drywall Screw
-
Flygel Self-Tapping Screw with Drill Bit
-
Universal Self-Tapping Screw with Round Head Torx
-
Universal self-tapping screw with countersunk TORX head
-
Wafer-head self-drilling screw for thin sheet metal
-
DIN 7982 Countersunk Head Self-Tapping Screw for Thin Metal Sheets and Plastic with Blunt Point, Type F
-
DIN 7981 Self-Tapping Screw with Round Head, TORX
-
DIN 7981 Self-Tapping Screw with Round Head and Sharp Point, Form C
Estimate for the “Drywall Self-Tapping Screw with Fine Thread and Drill Bit Tip” category
Send a specification or specify volumes — we will prepare a commercial proposal with timelines and payment terms within one business day.