Flygel Self-Tapping Screw with Drill Bit
FLOK supplies Flygel self-tapping screws with drill bit for fastening wood and wood-based products: particleboard, OSB, MDF, glued laminated timber.
The Flygel screw with drill bit features a drill-shaped tip design. The upper part of the drill bit has protrusions that act as a cutter, making it easier to penetrate the material being fastened. The screw head is shaped as a truncated cone with a flat base and milling grooves along the side perimeter — these make it easier to sink the head flush with the surface of the joined material. The head has a cross recess for driving with a hand or power tool.
The main application is as a fastening element when working with wood and wood-based products (glued laminated timber, particleboard, OSB, MDF panels and others). The flygel self-tapping screw is made from steel alloys with increased carbon content. Galvanic or hot-dip zinc coating is used as corrosion protection. They are produced in various sizes by length, shank diameter and protrusion size.
FLOK supplies fasteners and hardware in any volume and range.
| D | 7.8 | 9.5 |
|---|---|---|
| Kanta/Head | Ph2 | Ph2 |
| L (mm) | d | |
|---|---|---|
| 4.2 | 4.8 | |
| 25 | ||
| 32 | ||
| 38 | ||
| 50 | ||
| 70 |
See also
-
Universal Self-Tapping Screw with Round Head Torx
-
Universal self-tapping screw with countersunk TORX head
-
Wafer-head self-drilling screw for thin sheet metal
-
DIN 7982 Countersunk Head Self-Tapping Screw for Thin Metal Sheets and Plastic with Blunt Point, Type F
-
DIN 7981 Self-Tapping Screw with Round Head, TORX
-
DIN 7981 Self-Tapping Screw with Round Head and Sharp Point, Form C
-
DIN 7504 K Self-tapping Screw with Hex Head and Drill Point
-
DIN 571 Hexagon Head Wood Screw
Estimate for the “Flygel Self-Tapping Screw with Drill Bit” category
Send a specification or specify volumes — we will prepare a commercial proposal with timelines and payment terms within one business day.