Drop-in Anchor LA, LAH Sormat

The drop-in anchor is used for fastening into concrete, stone or brick structures. The anchor is installed into a pre-drilled hole of the required depth and diameter, which is cleaned before installation.

Drop-in anchor LA, LAH Sormat is the simplest type of anchor with internal thread for heavy and moderately heavy loads. After installation into the hole, the cone inside the anchor is driven down to the bottom with a special tool, and the anchor expands, providing reliable fastening. A fastener with matching thread — a bolt or screw — is then screwed into the anchor.

Specifications of the LA, LAH Sormat drop-in anchor

The length of the suitable bolt equals the length of the anchor’s internal thread plus the thickness of the material being fastened.

Diameter from 8 to 25 mm, thread from M6 to M20, length from 25 to 80 mm.

Materials

• Anchor LA — electrogalvanized steel.
• Anchor LAH — acid-resistant steel A4.

Dimensions of LA, LAH Sormat drop-in anchors

SKU	Anchor type	Thread diameter	Drill diameter, mm	Anchor length = hole depth	Thread length, mm	Package, pcs
70006	LA 6	M6	8	25	11	100/1000/56000
70008	LA 8	M8	10	30	13	100/1000/56000
70010	LA 10	M10	12	40	15	50/500/28000
70012	LA 12	M12	15	50	19	50/250/14000
70016	LA 16	M16	20	60	25	25/125/7000
70020	LA 20	M20	25	80	33	20/100/5600
74006	LAH 6	M6	8	25	11	100/1000/56000
74008	LAH 8	M8	10	30	13	100/1000/56000
74010	LAH 10	M10	12	40	15	50/500/28000
74012	LAH 12	M12	15	50	19	50/250/14000
74016	LAH 16	M16	20	60	25	25/125/7000
74020	LAH 20	M20	25	80	33	20/100/5600

This type also includes the multifunctional MTA anchor, used for bases with internal cavities.