PFG ES Anchor

The PFG ES anchor is designed for installation and secure fixing in concrete, brick or similar base materials. The characteristic design features allow this type of anchor to be used for mounting heavy and extra-heavy structures.

PFG ES anchors are metal sleeves with an internal thread and an external petal section. The anchor is installed in two stages: first it is driven into a prepared hole. Then a bolt or threaded rod is used to rotate the head, which “pulls up” the rear sleeve. This, in turn, spreads the anchor’s petals apart, firmly fixing the fastener in the hole.

If the recommendations for selecting the fastener (its length and diameter) are followed, along with the installation rules and hole preparation requirements, the fastener provides reliability and high load-bearing capacity.

Design features

PFG ES is distinguished by a significant area of expanding elements. This makes this type of anchor optimally suited for:

• mounting heavy structures;
• installation in weak, loose masonry base materials (for example, walls of old buildings);
• mounting into panels and base materials whose strength and structure are not precisely known.

The anchor is made of quality low-carbon steel with an optimal combination of strength and ductility. Good fixation in the material, as well as the overall load capacity, is provided by the anchor not so much due to the material as due to the design features. The main element is the expansion sleeve, which releases numerous petals across its entire area. These are what firmly fix the fastener in the material, especially in loose, low-quality concrete.

The threaded hole, into which the bolt or rod for expanding the anchor is inserted during installation, can later be used as a connection point. Threaded studs, eye bolts, forged hooks and other similar fasteners can be screwed into the hole.

FLOK supplies branded PFG ES anchors wholesale and retail. A wide range of sizes is available from stock.

PFG ES Anchor

The PFG ES anchor is made of zinc-plated and stainless steel.

Tuote	L	Poran	kpl/pcs
M 6	40	10	50/500
M 8	50	14	50/500
M 10	60	16	50/250
M 12	80	20	25/125
M 16	100	25	10/100

SKU	Type	L anchor length mm	d₀ drill diameter mm	Weight of anchors kg/1000 pcs
77501	ES 6	40	10	11.6
77502	ES 8	50	14	31.3
77503	ES 10	60	16	44.0
77504	ES 12	80	20	92.3
77505	ES 16	100	25	156.8
77601	ESS 6	40	10	11.7
77602	ESS 8	50	14	31.8
77603	ESS 10	60	16	44.7
77604	ESS 12	80	20	94.4
77521	ESSH 6	40	10	11.6
77522	ESSH 8	50	14	31.3
77523	ESSH 10	60	16	44.0
77524	ESSH 12	80	20	92.3
77525	ESSH 16	100	25	156.8