Washer M10

Washer M10 per DIN standard belongs to mounting elements used together with bolts and screws.

Using washers makes the fastening more reliable, reduces the load on the clamped part, and also prevents the bolt or screw from loosening spontaneously due to vibration and dynamic loads.

Washer types

Washer M10 DIN 125 is a flat washer in the form of a metal ring for a bolt or screw with a hole diameter of 10 mm. Per DIN 125, the inner hole diameter is 10.5…10.77 mm, and the outer diameter is 19.48…20 mm.

A variant of flat washers is the body washer M10 with zinc-plated coating. It is used for body repair work. The protective zinc-plated layer prevents rust from forming at the fastening point.

Spring lock washer M10 is a washer that prevents screws and bolts from self-loosening. It is a split ring with the ends of the cut offset in different directions. Per DIN, the inner hole diameter of the spring lock washer is 10.2…10.7 mm, and the outer diameter is 18.1 mm.