Roofing Screws with Rubber Washer

Roofing screws with rubber washer are most often used for roofing work, when metal or soft roof tiles, corrugated sheets or other material need to be fastened.

The washer is needed so that moisture does not accumulate inside the hole afterward.

The rubber washer is attached to a metal washer, which protects the joint from dust and small debris. Otherwise the screw looks standard – a threaded shank, a sharp or drill-point tip, and a hexagon head.

How to use

To drive in the screw, a hole needs to be drilled in the tile and the roof base, and then a screwdriver with a special bit or a wrench should be used. The fastener needs to be selected depending on the material the roof profiles are made of: fasteners for metal and wood differ in thread pitch.

Roofing screws with rubber washer can be bought at the FLOK store. The products are made of carbon steel or stainless steel. Many roofing fasteners come already painted in a certain color, which saves time during repair and construction.