Self-tapping screw with press washer head and drill tip

Self-tapping screws with a press washer head are used for fastening sheet metal and thin wooden structures.

The wide head covers a larger surface area, making the connection more secure.

A distinctive feature of these self-tapping screws is the mini drill tip at the end. This allows the fastener to be driven in without a pilot hole. The condition is that the material thickness must not exceed 2 millimeters.

The self-tapping screws are made mainly of steel and coated with zinc for corrosion protection. These fasteners are suitable for both indoor and outdoor use.

How to use

If the surface thickness does not exceed 2 millimeters, there is no need to drill a hole. The self-tapping screws are driven in with a screwdriver or a power driver.

You can buy self-tapping screws with press washer head and drill tip from FLOK.