Hexagon Connecting Nut

Nut dimensions comply with GOST standards: internal thread diameter — M6-M36, length — 30-125 millimeters. The nut is used to join fasteners together and, if needed, to extend the length of rods. Couplings are often used together with threaded studs of a matching size.

Installing and tightening the threaded fastener requires an open-end or socket wrench. Each nut has notches (small indentations) on one side. This allows it to be secured more reliably.

There are no equivalents to the DIN 1479 series tie couplings, so wherever their use is required by the process, hexagon nuts of this specific type must be purchased. In some cases, nuts of similar sizes and shapes made not of steel but of high-strength plastic may be used. Most often, in accordance with GOST standards, nuts made of A1-A5 steel, brass or carbon steel are used.

The steel hexagon tie nut (coupling) DIN 1479 can be purchased on the FLOK website.