GOST 15590-70 Hexagon Reduced Head Bolts with Guide Neck, Product Grade C. Construction and Dimensions

GOST 15590-70. Hexagon reduced head bolts with guide neck, product grade C. Construction and dimensions

Hexagon Reduced Head Bolts with Guide Neck, Product Grade C. Construction and Dimensions	GOST 15590-70

Effective date 01.01.72

1. This standard applies to hexagon reduced head bolts with guide neck, product grade C, with thread diameter from 6 to 48 mm.

2. The design and dimensions of bolts shall conform to those shown in the drawing and in Tables 1 and 2.

3. Thread — per GOST 24705. Thread runout and incomplete thread — per GOST 27148. Bolt ends — per GOST 12414.

3a. Radius under the head — per GOST 24670.

3b. Dimensional tolerances, form and position deviations, and control methods not established by this standard — per GOST 1759.1.

3c. Permissible bolt defects and control methods — per GOST 1759.2.

4. By agreement between the manufacturer and the customer, bolts of design 1 may be manufactured with a head height equal to k₁.

5. The head design variant is determined by the manufacturer.

5a. For marking purposes, bolts of designs 1 and 2 may be manufactured with a recess on the head end face, of dimensions that do not reduce the strength of the head, provided the recess depth does not exceed 0.4 k.

6. Technical requirements — per GOST 1759.0.

Mechanical properties of bolts shall comply with property classes 3.6, 4.6, 4.8, 5.6 and 5.8 per GOST 1759.4.

Bolts are supplied plain.

8. The mass of bolts is given in Appendix 1.

Table 1

mm

Nominal thread diameter d		6	8	10	12	(14)	16	(18)	20	(22)	24	(27)	30	36	42	48
Thread pitch		1	1.25	1.5	1.75	2		2.5			3		3.5	4	. 4.5	5
Guide neck diameter d₁ h15		6	8	10	12	14	16	18	20	22	24	27	30	36	42	48
Guide neck height h, min		3	4	5	6	7	8	9	10	11	12	14	15	18	21	24
Width across flats S		10	12	14	17	19	22	24	27	30	32	36	41	50	60	70
Head height k		4	5	6	7	8	9	10	11	12	13	15	17	20	23	26
Head height k₁		4.2	5.3	6.4	7.5	8.8	10.0	12.0	12.5	14	15	17	18.7	22.5	26	30
Circumscribed circle diameter e, min		10.9	13.1	15.3	18.7	20.9	23.9	26.2	29.6	33.0	35.0	39.6	45.2	55.4	66.4	76.9
d w, min		8.7	10.5	12.5	15.5	17.2	20.1	22.0	24.8	27.7	29.5	33.2	38.0	46.6	55.9	64.7
h w	min	0.15					0.20								0.25
	max	0.6					0.8
Diameter of hole in shank d₃		1.6	2.0	2.5	3.2		4.0			5.0			6.3		8.0
Diameter of hole in head d₄ H15		2.0	2.5		3.2		4.0							5.0
Distance from bearing surface to axis of hole in head l₂ js15		2.0	2.8	3.5	4.0	4.5	5.0	6.0	6.5	7.0	7.5	8.5	9.5	11.5	13.0	15.0

Note. Bolt dimensions shown in parentheses are not recommended for use.

Table 2

mm

Bolt length l	Thread length b and distance from head bearing surface to axis of hole in shank l₁, at nominal thread diameter d
	6		8		10		12		(14)		16		(18)		20		(22)		24		(27)		30		36		42		48
	l ₁	b	l ₁	b	l ₁	b	l ₁	b	l ₁	b	l ₁	b	l ₁	b	l ₁	b	l ₁	b	l ₁	b	l ₁	b	l ₁	b	l ₁	b	l ₁	b	l ₁	b
(28)	24	18	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
30	26	18	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
(32)	28	18	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
35	31	18	31	22	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
(38)	34	18	34	22	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
40	36	18	36	22	36	26	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
45	41	18	41	22	41	26	40	30	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
50	46	18	46	22	46	26	45	30	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
55	51	18	51	22	51	26	50	30	50	34	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
60	56	18	56	22	56	26	55	30	55	34	54	38	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
65	61	18	61	22	61	26	60	30	60	34	59	38	59	42	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
70	66	18	66	22	66	26	65	30	65	34	64	38	64	42	64	46	-	-	-	-	-	-	-	-	-	-	-	-	-	-
75	71	18	71	22	71	26	70	30	70	34	69	38	69	42	69	46	68	50	-	-	-	-	-	-	-	-	-	-	-	-
80	76	18	76	22	76	26	75	30	75	34	74	38	74	42	74	46	73	50	73	54	-	-	-	-	-	-	-	-	-	-
(85)	81	18	81	22	81	26	80	30	80	34	79	38	79	42	79	46	78	50	78	54	-	-	-	-	-	-	-	-	-	-
90	86	18	86	22	86	26	85	30	85	34	84	38	84	42	84	46	83	50	83	54	82	60	-	-	-	-	-	-	-	-
(95)	-	-	91	22	91	26	90	30	90	34	89	38	89	42	89	46	88	50	88	54	87	60	-	-	-	-	-	-	-	-
100	-	-	96	22	96	26	95	30	95	34	94	38	94	42	94	46	93	50	93	54	92	60	91	66	-	-	-	-	-	-
(105)	-	-	-	-	101	26	100	30	100	34	99	38	99	42	99	46	98	50	98	54	97	60	96	66	-	-	-	-	-	-
110	-	-	-	-	106	26	105	30	105	34	104	38	104	42	104	46	103	50	103	54	102	60	101	66	-	-	-	-	-	-
(115)	-	-	-	-	111	26	110	30	110	34	109	38	109	42	109	46	108	50	108	54	107	60	106	66	105	78	-	-	-	-
120	-	-	-	-	116	26	115	30	115	34	114	38	114	42	114	46	113	50	113	54	112	60	111	66	110	78	-	-	-	-
(125)	-	-	-	-	121	26	120	30	120	34	119	38	119	42	119	46	118	50	118	54	117	60	116	66	115	78	-	-	-	-
130	-	-	-	-	126	32	125	36	125	40	124	44	124	48	124	52	123	56	123	60	122	66	121	72	120	84	-	-	-	-
140	-	-	-	-	136	32	135	36	135	40	134	44	134	48	134	52	133	56	133	60	132	66	131	72	130	84	128	96	-	-
150	-	-	-	-	146	32	145	36	145	40	144	44	144	48	144	52	143	56	143	60	142	66	141	72	140	84	128	96	138	108
160	-	-	-	-	156	32	155	36	155	40	154	44	154	48	154	52	153	56	153	60	152	66	151	72	150	84	148	96	148	108
170	-	-	-	-	166	32	165	36	165	40	164	44	164	48	164	52	163	56	163	60	162	66	161	72	160	84	158	96	158	108
180	-	-	-	-	176	32	175	36	175	40	174	44	174	48	174	52	173	56	173	60	172	66	171	72	170	84	168	96	168	108
190	-	-	-	-	186	32	185	36	185	40	184	44	184	48	184	52	183	56	183	60	182	66	181	72	180	84	178	96	178	108
200	-	-	-	-	196	32	195	36	195	40	194	44	194	48	194	52	193	56	193	60	192	66	191	72	190	84	188	96	188	108
220	-	-	-	-	-	-	215	49	215	53	214	57	214	61	214	65	213	69	213	73	212	79	211	85	210	97	208	109	208	121
240	-	-	-	-	-	-	235	49	235	53	234	57	234	61	234	65	233	69	233	73	232	79	231	85	230	97	228	109	228	121
260	-	-	-	-	-	-	255	49	255	53	254	57	254	61	254	65	253	69	253	73	252	79	251	85	250	97	248	109	248	121
280	-	-	-	-	-	-	-	-	275	53	274	57	274	61	274	65	273	69	272	73	272	79	271	85	270	97	268	109	268	121
300	-	-	-	-	-	-	-	-	295	53	294	57	294	61	294	65	293	69	293	73	292	79	291	85	290	97	288	109	288	121

Note. Bolts with lengths shown in parentheses are not recommended for use.

Example of designation for a bolt of design 1 with thread diameter d = 24 mm, length l = 120 mm, property class 4.6:

Bolt M24×120.46 GOST 15590-70

Same, property class 5.6, design 2:

Bolt 2M24×120.56 GOST 15590-70

APPENDIX 1

For reference

Bolt mass (design 1)

Bolt length l, mm	Theoretical mass of 1000 bolts, kg, at nominal thread diameter d, mm
	6	8	10	12	14	16	18	20	22	24	27	30	36	42	48
28	8.236	-	-	-	-	-	-	-	-	-	-	-	-	-	-
30	8.589	-	-	-	-	-	-	-	-	-	-	-	-	-	-
32	8.942	-	-	-	-	-	-	-	-	-	-	-	-	-	-
35	9.472	17.25	-	-	-	-	-	-	-	-	-	-	-	-	-
38	10.020	18.21	-	-	-	-	-	-	-	-	-	-	-	-	-
40	10.360	18.84	30.27	-	-	-	-	-	-	-	-	-	-	-	-
45	11.240	20.44	32.78	50.11	-	-	-	-	-	-	-	-	-	-	-
50	12.120	22.03	35.29	53.75	-	-	-	-	-	-	-	-	-	-	-
55	13.010	23.63	37.81	57.38	79.81	-	-	-	-	-	-	-	-	-	-
60	13.890	25.22	40.32	61.02	84.79	116.6	-	-	-	-	-	-	-	-	-
65	14.780	26.81	42.83	64.66	89.77	123.3	157.6	-	-	-	-	-	-	-	-
70	15.660	28.41	45.35	68.30	94.74	130.0	165.8	213.7	-	-	-	-	-	-	-
75	16.540	30.00	47.86	71.94	99.72	136.6	174.1	224.1	281.7	-	-	-	-	-	-
80	17.420	31.60	50.37	75.58	104.70	143.3	182.4	234.5	294.5	353.2	-	-	-	-	-
85	18.310	33.19	52.88	79.22	109.70	150.0	190.7	243.0	307.3	368.2	-	-	-	-	-
90	19.190	34.78	55.40	82.87	114.70	156.6	198.9	255.6	320.1	383.2	509.8	-	-	-	-
95	-	36.38	57.91	86.51	119.60	163.3	207.2	265.8	332.9	398.2	529.2	-	-	-	-
100	-	37.97	60.42	90.15	124.60	170.0	216.5	276.2	345.8	413.2	548.5	709.5	-	-	-
105	-	-	62.93	93.79	129.60	176.6	223.7	286.6	358.5	428.2	567.9	733.2	-	-	-
110	-	-	65.45	97.43	134.50	185.3	231.7	297.0	371.3	443.2	587.2	757.0	-	-	-
115	-	-	67.96	101.10	139.50	190.0	240.3	307.4	384.1	458.2	606.6	780.7	1198.0	-	-
120	-	-	70.47	104.80	144.50	196.6	248.6	317.9	396.9	473.2	625.9	804.4	1232.0	-	-
125	-	-	72.99	108.40	149.50	203.3	256.8	328.3	409.7	488.2	645.3	828.1	1267.0	-	-
130	-	-	75.50	112.00	154.50	210.0	265.1	338.7	422.5	503.2	664.7	851.8	1301.0	-	-
140	-	-	80.52	119.00	164.40	223.3	281.7	359.5	448.1	533.2	703.7	899.2	1370.0	1985.0	-
150	-	-	85.52	126.60	174.40	236.6	298.2	380.4	473.8	563.2	762.0	946.1	1439.0	2080.0	2864.0
160	-	-	90.57	133.90	184.40	250.0	314.7	401.2	499.4	593.2	800.8	994.1	1508.0	2174.0	2988.0
170	-	-	95.59	141.20	194.40	263.3	331.3	422.0	525.0	623.2	819.6	1041.0	1577.0	2268.0	3111.0
180	-	-	100.70	148.40	204.20	276.6	347.8	442.9	550.6	653.2	858.3	1089.0	1646.0	2362.0	3235.0
190	-	-	105.70	155.70	214.20	290.0	364.4	463.0	576.2	683.2	897.0	1136.0	1714.0	2456.0	3358.0
200	-	-	110.70	163.00	224.10	303.0	380.9	484.5	601.8	713.2	935.7	1184.0	1783.0	2551.0	3482.0
220	-	-	-	177.50	244.00	330.0	414.0	526.2	653.1	773.2	1013.0	1279.0	1921.0	2739.0	3729.0
240	-	-	-	192.20	263.90	356.6	447.1	567.9	704.3	833.2	1091.0	1373.0	2059.0	2927.0	3976.0
260	-	-	-	206.70	283.80	383.3	480.2	609.5	755.5	893.3	1168.0	1468.0	2196.0	3116.0	4223.0
280	-	-	-	-	303.70	410.0	513.3	651.2	806.7	953.3	1246.0	1563.0	2334.0	3304.0	4471.0
300	-	-	-	-	323.60	426.6	564.4	692.9	858.0	1014.0	1323.0	1658.0	2472.0	3493.0	4718.0

INFORMATIONAL DATA

1. DEVELOPED AND SUBMITTED BY the Ministry of Ferrous Metallurgy of the USSR

DEVELOPERS

I. N. Nedoviziy, Cand. Sci. (Eng.); B. M. Rigmant; V. I. Mokrinsky, Cand. Sci. (Eng.)

2. APPROVED AND PUT INTO EFFECT by Decree No. 270 of the Committee for Standards, Weights and Measuring Instruments under the Council of Ministers of the USSR dated 04.03.70

3. INTRODUCED FOR THE FIRST TIME

4. REFERENCE REGULATORY AND TECHNICAL DOCUMENTS

Designation of the referenced regulatory document	Clause number	Designation of the referenced regulatory document	Clause number
GOST 1759.0-87	6	GOST 12414-94	3
GOST 1759.1-82	3b	GOST 24670-81	3a
GOST 1759.2-82	3v	GOST 24705-81	3
GOST 1759.4-87	6	GOST 27148-86	3

5. The expiration restriction was lifted by Protocol No. 5-94 of the Interstate Council for Standardization, Metrology and Certification (IUS 11-12-94).

6. REISSUE (April 1998) with Amendments No. 2, 3, 4, 5, 6, approved in February 1974, March 1981, May 1985, March 1989, July 1995 (IUS 3-74, 6-81, 8-85, 6-89, 9-95).

Corresponds to DIN 931, GOST 7795-70.