GOST 12464-67 Threaded Bushings. Design
GOST 12464-67 · General fastener standards
This is an informational translation of a Russian national standard. The Russian original is authoritative.
GOST 12464-67*
Group G27
7009-0560
INTERSTATE STANDARD
THREADED BUSHINGS
Design
Threaded bushes. Design
Effective date 1967-07-01
APPROVED by the Committee for Standards, Measures and Measuring Instruments under the Council of Ministers of the USSR on January 3, 1967. Effective date set as 01.07.67
By Decree of the USSR State Standards Committee of 17.03.88 No. 567, the validity period restriction was lifted
SUPERSEDES MN 371-60, MN 5436-64
- REISSUE (October 1999) with Amendments No. 1, 2, approved in June 1980, March 1988 (IUS 9-80, 6-88)
- The design and dimensions of threaded bushings shall conform to the drawing and the table.
Dimensions in mm
| Bushing designations | Application | * | (tolerance field s7) | (tolerance field f9) | Weight, kg | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1st series | 2nd series | ||||||||||
| 7009-0561 | M6 | 10 | 12 | 12 | 15 | 3 | 1.5 | 0.6 | 0.008 | ||
| 0562 | 12 | 0.009 | |||||||||
| 0563 | M8 | 12 | 14 | 14 | 18 | 0.012 | |||||
| 0564 | 16 | 0.015 | |||||||||
| 0565 | M10 | 16 | 16 | 16 | 20 | 0.019 | |||||
| 0566 | 20 | 0.022 | |||||||||
| 0567 | Tr 10x2 | 16 | 0.019 | ||||||||
| 0568 | 20 | 0.021 | |||||||||
| 0569 | Tr 10x2 LH | 16 | 0.018 | ||||||||
| 0570 | 20 | 0.021 | |||||||||
| 0571 | M12 | 18 | 20 | 20 | 25 | 4 | 2.0 | 0.034 | |||
| 0572 | 25 | 0.045 | |||||||||
| 0573 | Tr 12x3 | 18 | 0.033 | ||||||||
| 0574 | 25 | 0.045 | |||||||||
| 0575 | Tr 12x3 LH | 18 | 0.033 | ||||||||
| 0576 | 25 | 0.045 | |||||||||
| 0577 | M16 | 25 | 25 | 25 | 30 | 0.063 | |||||
| 0578 | 32 | 0.079 | |||||||||
| 0579 | Tr 16x4 | 25 | 0.063 | ||||||||
| 0580 | 32 | 0.079 | |||||||||
| 0581 | Tr 16x4 LH | 25 | 0.063 | ||||||||
| 0582 | 32 | 0.079 | |||||||||
| 0583 | M20 | 32 | 28 | 28 | 34 | 5 | 3.0 | 1.0 | 0.088 | ||
| 0584 | 40 | 0.107 | |||||||||
| 0585 | Tr 20x4 | 32 | 0.087 | ||||||||
| 0586 | 40 | 0.107 | |||||||||
| 0587 | Tr 20x4 LH | 32 | 0.087 | ||||||||
| 0588 | 40 | 0.107 | |||||||||
| 0589 | M24 | 36 | 32 | 32 | 38 | 0.113 | |||||
| 0590 | 48 | 0.146 | |||||||||
| 0591 | Tr 24x5 | 36 | 0.113 | ||||||||
| 0592 | 48 | 0.146 | |||||||||
| 0593 | Tr 24x5 LH | 36 | 0.112 | ||||||||
| 0594 | 48 | 0.146 | |||||||||
| 0595 | Tr 26x5 | 40 | 36 | 36 | 42 | 0.167 | |||||
| 0596 | 52 | 0.213 | |||||||||
| 0597 | Tr 26x5 LH | 40 | 0.170 | ||||||||
| 0598 | 52 | 0.213 | |||||||||
| 0599 | Tr 28x5 | 40 | 40 | 40 | 46 | 0.227 | |||||
| 0600 | 55 | 0.292 | |||||||||
| 0601 | Tr 28x5 LH | 40 | 0.227 | ||||||||
| 7009-0602 | 55 | 0.292 | |||||||||
| 7009-0603 | M30 | 45 | 42 | 42 | 48 | 6 | 4.0 | 1.6 | 0.260 | ||
| 0604 | 60 | 0.339 | |||||||||
| 0605 | Tr 30x6 | 45 | 0.259 | ||||||||
| 0606 | 60 | 0.339 | |||||||||
| 0607 | Tr 30x6 LH | 45 | 0.258 | ||||||||
| 0608 | 60 | 0.338 | |||||||||
| 0609 | Tr 32x6 | 48 | 45 | 45 | 52 | 0.321 | |||||
| 0610 | 63 | 0.414 | |||||||||
| 0611 | Tr 32x6 LH | 48 | 0.321 | ||||||||
| 0612 | 63 | 0.414 | |||||||||
| 0613 | M36 | 55 | 50 | 50 | 58 | 7 | 5.0 | 0.445 | |||
| 0614 | 70 | 0.557 | |||||||||
| 0615 | Tr 36x6 | 55 | 0.445 | ||||||||
| 0616 | 70 | 0.556 | |||||||||
| 0617 | Tr 36x6 LH | 55 | 0.445 | ||||||||
| 0618 | 70 | 0.556 | |||||||||
| 0619 | Tr 40x6 | 60 | 55 | 55 | 63 | 0.568 | |||||
| 0620 | 80 | 0.743 | |||||||||
| 0621 | Tr 40x6 LH | 60 | 0.568 | ||||||||
| 0622 | 80 | 0.743 | |||||||||
| 0623 | M42 | 60 | 0.507 | ||||||||
| 7009-0624 | 80 | 0.662 |
- When selecting a size, series 1 should be preferred over series 2.
Example of designation of a threaded bushing with dimensions =M6, =10 mm:
Bushing 7009-0561 GOST 12464-67
(Amended version, Amendment No. 2).
-
Substitution with other steel grades having mechanical properties not lower than those of steel grade 40Kh is allowed.
-
Hardness - 35.0…39.5 HRC.
(Amended edition, Amendment No. 1, 2).
- Unspecified dimensional tolerances: h14, ±
(Amended version, Amendment No. 2).
- Metric thread - per GOST 24705-81*. Thread tolerance field - 7H per GOST 16093-81**. Trapezoidal thread - per GOST 24737-81. Thread tolerance field - 8H per GOST 9562-81.
- In the Russian Federation, GOST 24705-2004 is in effect;
** In the Russian Federation, GOST 16093-2004 is in effect. - Note of the database compiler.
(Amended edition, Amendment No. 1, 2).
- Chamfer dimensions for the thread - per GOST 10549-80.
(Amended edition, Amendment No. 1).
-
Grinding wheel runout grooves - per GOST 8820-69.
-
(Deleted, Amendment No. 1).
-
Coating - Chem. Ox. oiled (coating designation per GOST 9.306-85).
-
Mark a lot of parts of one size on the container or packaging, indicating the designation.
9, 10. (Amended edition, Amendment No. 2).
- An example of bushing application is given in Appendix 2.
(Added additionally, Amendment No. 2).
APPENDIX 1
For reference
EXAMPLES OF THREADED BUSHING MOUNTING
Dimensions in mm
| Thread | (tolerance field u8) | ||||||
|---|---|---|---|---|---|---|---|
| Metric | Trapezoidal | ||||||
| M6 | - | - | M6 | 5 | 4.5 | 10 | 3 |
| M8 | - | - | |||||
| M10 | Tr 10×2 | Tr 10×2 LH | |||||
| M12 | Tr 12×3 | Tr 12×3 LH | |||||
| M16 | Tr 16×4 | Tr 16×4 LH | |||||
| M20 | Tr 20×4 | Tr 20×4 LH | M8 | 6 | 6.0 | 16 | 4 |
| M24 | Tr 24×5 | Tr 24×5 LH | |||||
| - | Tr 26×5 | Tr 26×5 LH | |||||
| - | Tr 28×5 | Tr 28×5 LH | |||||
| M30 | Tr 30×6 | Tr 30×6 LH | |||||
| - | Tr 32×6 | Tr 32×6 LH | |||||
| M36 | Tr 36×6 | Tr 36×6 LH | |||||
| M42 | Tr 40×6 | Tr 40×6 LH |
(Amended edition, Amendment No. 1, 2).
APPENDIX 2 (informative). EXAMPLE OF THREADED BUSHING APPLICATION
APPENDIX 2
For reference
Estimate for the “GOST 12464-67” category
Send a specification or specify volumes — we will prepare a commercial proposal with timelines and payment terms within one business day.