GOST 10299-80 Button-Head Rivets, Product Grades B and C

Button-head rivets for general mechanical engineering applications, shank diameter from 1 to 36 mm, product grades B and C. The standard fully complies with ST SEV 1019-78.

Button-head rivets shall meet all requirements of GOST 10304-80 and the requirements set out in the relevant sections of this standard.

1. Dimensions

Rivet dimensions must conform to those shown in the drawing and in Tables 1 and 2.

BUTTON-HEAD RIVETS, PRODUCT GRADES B AND C. Specifications Button-head rivets classes B and C. Specifications	GOST 10299-80* (ST SEV 1019-78) Supersedes GOST 10299-68

Rivet length is selected from the following series: 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40, 42, 45, 48, 50, 52, 55, 58, 60, 65, 70, 75, 80, 85, 90, 95, 100, 110, 120, 130, 140, 150, 160, 170, 180 mm.

Table 1, mm

Shank diameter d	1	1.2	(1.4)	1.6	2	2.5	3	(3.5)	4	5	6	8	10
Head diameter D	1.8	2.1	2.5	2.9	3.5	4.4	5.3	6.3	7.1	8.8	11	14	16
Head height H	0.6	0.7	0.8	1.0	1.2	1.5	1.8	2.1	2.4	3.0	3.6	4.8	6.0
Radius under head r, max	0.2							0.4			0.5		0.6
Head dome radius R	1	1.2	1.4	1.6	1.9	2.4	2.9	3.4	3.8	4.7	6	7.5	8.3
Distance from head base to diameter measurement point l	1.5					3				4			6

Table 1 (continued), mm

Shank diameter d	12	(14)	16	(18)	20	(22)	24	30	36
Head diameter D	19	22	25	27	30	35	37	45	55
Head height H	7.2	8.4	9.5	11	12	13	16	20	24
Radius under head r, max	0.8		1.0				1.2		1.6
Head dome radius R	9.8	11.4	13	13.8	15.4	18.3	18.7	22.7	27.8
Distance from head base to diameter measurement point l	6			8				10

Note. Dimensions shown in parentheses are not recommended for use.

Table 2

Shank diameter d	Length L	Shank diameter d	Length L
1.0	2-8	10	14-100
1.2	2-10	12	18-110
(1.4)	3-12	(14)	20-140
1.6	3-12	16	20-140
2.0	3-16	(18)	28-140
2.5	3-20	20	34-160
3.0	4-40	(22)	38-170
(3.5)	5-40	24	40-180
4.0	5-50	30	55-180
5.0	7-60	36	55-180
6.0	7-60
8.0	9-70

Example of designation for a button-head rivet, product grade B, shank diameter d = 8 mm, length L = 20 mm, material group 00, plain (uncoated):

Rivet 8×20.00 GOST 10299-80

The theoretical mass of rivets is given in the reference appendix.

2. Technical requirements

Head height tolerances: for H < 1 mm — plus 0.28, minus 0.16 mm; for H = 1 mm — ±0.28 mm.

Appendix (informative). Mass of steel rivets

Length L, mm	Theoretical mass of 1000 rivets, kg, at nominal shank diameter d, mm
	1	1.2	(1.4)	1.6	2	2.5	3	(3.5)	4	5	6	8	10	12	(14)	16	(18)	20	(22)	21	30	36
2	0.019	0.029
3	0.025	0.038	0.054	0.077	0.127	0.218
4	0.031	0.047	0.066	0.093	0.151	0.257	0.401
5	0.038	0.056	0.078	0.109	0.176	0.295	0.457	0.670	0.924
6	0.044	0.064	0.090	0.125	0.201	0.334	0.512	0.746	1.023
7	0.050	0.073	0.102	0.140	0.225	0.372	0.568	0.821	1.121	1.906	3.084
8	0.056	0.082	0.114	0.156	0.251	0.411	0.623	0.896	1.220	2.060	3.306
9		0.091	0.126	0.172	0.275	0.449	0.679	0.972	1.319	2.214	3.528	6.902
10		0.100	0.138	0.188	0.299	0.488	0.734	1.048	1.417	2.368	3.751	7.296
12			0.163	0.219	0.349	0.565	0.845	1.199	1.615	2.676	4.194	8.085
14					0.398	0.642	0.956	1.350	1.812	2.985	4.638	8.874	14.23
16					0.447	0.737	1.067	1.501	2.009	3.293	5.082	9.663	15.47
18						0.796	1.178	1.652	2.207	3.601	5.526	10.452	16.70	25.50
20						0.873	1.289	1.803	2.404	3.909	5.970	11.242	17.93	27.28	39.11	53.33
22							1.400	1.954	2.601	4.218	6.414	12.203	19.17	29.05	41.53	56.49
24							1.511	2.105	2.798	4.526	6.858	12.820	20.40	30.83	43.94	59.65
26							1.622	2.256	2.996	4.834	7.302	13.609	21.63	32.61	46.36	62.80
28							1.733	2.407	3.193	5.142	7.746	14.398	22.87	34.38	48.78	65.96	86.07
30							1.844	2.558	3.390	5.451	8.190	15.187	24.10	36.16	51.19	69.12	90.07
32							1.955	2.709	3.588	5.759	8.633	15.977	25.33	37.93	53.61	72.27	94.06
34							2.065	2.860	3.785	6.067	9.077	16.766	26.56	39.71	56.03	75.43	98.06	124.2
36							2.177	3.011	3.982	6.375	9.521	17.555	27.80	41.48	58.44	78.59	102.10	129.1
38							2.288	3.162	4.179	6.684	9.965	18.344	29.03	43.26	60.86	81.74	106.04	134.0	171.4
40							2.399	3.313	4.377	6.992	10.40	19.13	30.26	45.03	63.28	84.90	110	139.0	177.3	226.2
42									4.574	7.300	10.85	19.92	31.50	46.81	65.69	88.06	114	143.9	192.3	233.3
45									4.870	7.763	11.52	21.11	33.35	49.47	69.32	92.80	120	151.3	201.2	244.0
48									5.166	8.225	12.19	22.29	35.20	52.14	72.95	97.53	126	158.7	207.2	254.6
50									5.363	8.533	12.63	23.08	36.43	53.91	75.36	100.70	130	163.6	213.1	261.8
52										8.842	13.07	23.87	37.66	55.69	77.78	103.80	134	168.6	222.1	268.9
55										9.304	13.74	25.05	39.51	58.35	81.40	108.60	140	176.0	231.1	279.5	462.7	719.7
58										9.766	14.40	26.24	41.36	61.02	85.03	113.30	146	183.3	237.0	290.6	481.5	743.7
60										10.075	14.85	27.03	42.59	62.79	87.45	116.50	150	188.3	251.9	297.3	490.5	759.7
65												29.00	45.68	67.23	93.49	124.40	160	200.6	266.9	315.0	518.2	799.6
70												30.97	48.76	71.67	99.53	132.20	170	213.0	281.8	332.8	546.0	839.6
75													51.84	76.11	105.60	140.10	180	225.3	296.7	350.5	573.7	879.5
80													54.93	80.55	111.60	148.00	190	237.6	311.6	368.3	601.5	919.6
85													58.01	84.99	117.70	155.90	200	250.0	326.5	386.0	629.2	959.4
90													61.09	89.43	123.70	163.80	210	262.3	341.5	403.8	657.0	999.4
95													64.17	93.86	129.70	171.70	220	274.6	356.4	421.6	684.7	1039.3
100													67.25	98.30	135.80	179.60	230	287.0	386.2	439.3	712.4	1079.3
110														107.20	147.90	195.40	250	311.6	416.1	474.8	769.9	1159.2
120															160.00	211.20	270	336.3	445.9	510.3	823.4	1239.1
130															172.00	226.90	290	360.9	475.7	545.8	878.9	1319.0
140															184.10	242.74	310	385.6	505.6	581.4	934.4	1398.9
150																		410.2	535.6	616.9	989.9	1478.8
160																		434.9	565.3	652.4	1045.4	1558.7
170																			595.1	687.9	1100.9	1638.6
180																				723.4	1156.3	1718.5

Note. To determine the mass of rivets made from other materials, the mass values given in the table are multiplied by the following coefficients: 0.356 for aluminium alloy; 1.080 for brass; 1.134 for copper.

Equivalent to DIN 660, ISO 1051.