Knurled Rivet Nut with Small Flange
Knurled rivet nut with small flange for thin sheets and one-sided installation. FLOK supplies it in carbon or stainless steel and non-ferrous metals.
The knurled rivet nut is installed in thin sheet materials and is designed to create threaded connections where standard thread tapping is not possible.
The knurled surface provides secure fixation in the material without rotation. The small flange distributes the load evenly and prevents cracking in the material.
Rivet nuts are made of carbon or stainless steel, as well as non-ferrous metals. This solution for joining parts is also suitable when only one-sided access to the installation point is available.
| D d1 d2 d3 L k Material thickness Do | ||||||||
|---|---|---|---|---|---|---|---|---|
| min. max. | ||||||||
| M3 | 4.9 -0.1 | 5.8 ±0.3 | 4 +0.05 | 8.8 ±0.3 | 0.2 | 0.5 | 2.0 | 5 |
| 11 ±0.3 | 2.0 | 3.0 | ||||||
| M4 | 5.9 -0.1 | 6.8 ±0.3 | 5 +0.05 | 10.5 ±0.3 | 0.5 | 0.5 | 2.5 | 6 |
| 12 ±0.3 | 2.5 | 4.0 | ||||||
| M5 | 6.9 -0.1 | 8.2 ±0.3 | 5.8 +0.1 | 12.5 ±0.3 | 0.5 | 0.5 | 2.5 | 7 |
| 14 ±0.3 | 2.5 | 4.0 | ||||||
| M6 | 8.9 -0.1 | 10.2 ±0.3 | 7.8 +0.1 | 14 ±0.3 | 0.6 | 0.5 | 3.0 | 9 |
| 17.5 ±0.3 | 3.0 | 6.0 | ||||||
| M8 | 10.9 -0.1 | 12.2 ±0.3 | 9.5 +0.1 | 16.0 ±0.3 | 0.7 | 0.5 | 3.0 | 11 |
| 18.5 ±0.3 | 3.0 | 6.0 | ||||||
| M10 | 12 -0.1 | 14.5 ±0.3 | 10.5 +0.1 | 19 ±0.3 | 0.8 | 1.0 | 4.0 | 12 |
| 21 ±0.3 | 4.0 | 6.0 |
Estimate for the “Knurled Rivet Nut with Small Flange” category
Send a specification or specify volumes — we will prepare a commercial proposal with timelines and payment terms within one business day.