Furniture Screw-Stud

A furniture screw-stud is a special type of fastener fitted with two kinds of thread. It looks like a metal stud with no protruding head: one end carries a metric screw thread, the other a coarse, single-start thread.

One end of the fastener is driven into a dense material such as wood or concrete (using a plastic wall plug), and the other end is used to secure various mounting structures or built-in furniture parts. This type of fastener is widely used in indoor and outdoor installation work.

Features of the fastener

A furniture screw-stud is a type of special fastener that combines the advantages of two fastener types. It allows suspended structures to be connected to a wall or ceiling slab and is used in various installation work. A hole of the required diameter is drilled in the wall or slab; for concrete or brick, a plastic wall plug must also be installed. The end with the single-start thread and pointed tip is driven into the hole, where it is securely fixed in the material.

The screw section has a recess for tightening with a wrench, which allows a high tightening torque. The screw side is fastened to the structure being installed using a nut, with or without a washer. This system provides a secure attachment for plumbing fixtures, pipe clamps, built-in furniture parts and more.

Materials and selection parameters

Furniture screw-studs are made from the following materials:

• Plain steel (no protective coating). This fastener is used in dry indoor spaces without increased corrosive activity in the environment.
• Painted steel with a protective coating applied by painting. This increases corrosion resistance and service life.
• Steel with a protective zinc coating. It is applied by electrolytic zinc plating and gives the surface an attractive shine.

Metal with a protective zinc coating can be used for outdoor installation, as well as in conditions of increased humidity, for example in a bathroom or kitchen. Zinc-plated fasteners are designed for long-term use under constant exposure to an aggressive environment.

Applications

Furniture screw-studs are used not only in the manufacture and installation of built-in cabinet furniture. They are also used in construction and finishing work in premises of any purpose, in the installation of plumbing fixtures, utility runs, and more. The fastener provides a reliable threaded connection of a part to a wall or ceiling, allowing complex structures to be installed. This type of fastener is designed for many years of use.

FLOK supplies furniture screw-studs manufactured in accordance with applicable standards. The catalog offers a wide range of sizes, so you can select a fastener with the required set of characteristics.

d (mm)		d
		M2	M2.5	M3	M4	M5	M6
Furniture screw	5
Furniture screw	6
Furniture screw	8
Furniture screw	10
Furniture screw	12
Furniture screw	14
Furniture screw	16
Furniture screw	20
Furniture screw	25
Furniture screw	30
Furniture screw	35
Furniture screw	40
Furniture screw	45
Furniture screw	50
Furniture screw	60