DIN 967 Round (Button) Head Screw with Flange (Hemispherical with Pressed Washer)

The DIN 967 round (button) head screw is a fastener with a flange and a hemispherical head, used across various industries and construction. The flange ensures a reliable connection between parts.

Characteristics and advantages

The screw thread diameter ranges from M2 to M10, length from 5 to 100 mm. The material is steel of property class 4.8, 5.8, 8.8, resistant to significant mechanical loads. The screw head has a Pozidriv (PZ) cross recess, which provides convenient installation and removal. The coating is usually applied by zinc plating for corrosion protection.

Key features of round (button) head screws:

• The pressed washer increases the clamping area
• The round head shape creates an aesthetic appearance
• The flange prevents damage to the material surface
• The cross recess ensures reliable driving
• The zinc-plated surface protects against corrosion

This type of furniture screw is universal in application. During installation, the tool should be selected according to the recess type and tightening torque should be observed — this ensures connection reliability and structural durability.

The equivalent of the DIN 967 screw is the product under GOST 11644. When selecting an equivalent, technical characteristics and the requirements of the specific project are taken into account.

Where to buy DIN 967 screws?

DIN 967 screws can be purchased from FLOK. FLOK supplies fasteners with various characteristics and sizes, wholesale and in small batches.

DIN 967 is a round (button) head screw with flange (hemispherical with pressed washer), a fastener compliant with international quality standards. Available in a wide range of sizes and coating options, used across various industries.

Correspondence table of DIN 967 and GOST 11644-75 standards

Parameter	DIN 967	GOST 11644-75
d - nominal thread diameter, mm	M3 to M8	M2 to M10
l - screw length, mm	4 to 60	3 to 70
Product grade	A	A, B
Recess type	cross Ph or Pz	slot