Lifting Hooks 320A
Lifting hook 320A per GOST 25573-82, property class 8, working load 0.75–22 t. FLOK supplies hooks for slings, spreader beams and rigging operations.
Lifting hooks 320A are a load-handling device used for slings, spreader beams and other loading and unloading elements. The 320A hook is widely used for manufacturing load-handling components. Due to its increased strength and design features, it is used in industry and everyday life.
Features of lifting hooks
Lifting hooks 320A are manufactured in accordance with GOST 25573-82 from low-alloy steel grades or ST-20. Features of the hook:
- Lower weight compared to domestically produced models, while meeting reliability, durability and load capacity requirements.
- May be used in harsh climatic conditions.
After manufacturing, the models are additionally coated, which protects the body from increased humidity and environmental factors.
Application areas
The 320A lifting hook, made of high-strength steel, is used to assemble chain or wire rope slings, for rigging or towing. It may also be used as an end element. According to regulatory requirements, the safety factor is fourfold, which corresponds to property class 8. The model is equipped with a static eye and a latch locking mechanism.
The reduced weight of the hook eases the load on the sling’s structural elements. The working load ranges from 0.75 to 22 tonnes.
Selection
The choice of the 320A lifting hook model is based on the load capacity, strength and operating characteristics of the load. The load indicated by the manufacturer for the element must not be exceeded. Before use, be sure to inspect the body of the load-handling element for defects.
Estimate for the “Lifting Hooks 320A” category
Send a specification or specify volumes — we will prepare a commercial proposal with timelines and payment terms within one business day.