Wood Screw with L-Shaped Hook

The wood screw with L-shaped hook is intended for fastening in households, retail spaces, offices, at conferences and seminars. This fastener can be installed into the surface of almost any material within minutes. In a wooden surface, the screw is driven in without pre-drilling a hole — by its design it is equivalent to a self-tapping fastener. No screwdrivers, wrenches or other auxiliary tools are required. The head, bent at a 90-degree angle, serves as a lever for driving the hardware into hardwood, except oak, ash and beech. A version made of durable plastic is also produced.

If fastening into concrete or brick is required, an additional hole is drilled in the material and the screw is secured using a nylon or plastic wall plug.

Dimensions and material of the hook screw

The screw is made of carbon steel, subsequently zinc-plated by electroplating a protective layer. On separate request, brass plating of the fastener and additional application of anti-corrosion paint are possible. The metric dimensions of the screw comply with GOST requirements: diameter from 2.25 to 6.0 mm, length from 20 to 120 mm. The size range is fairly wide, which ensures a choice of fasteners for different tasks. The screw has a universal thread, which determines its wide application: for temporary or permanent hanging of mirrors, pictures, posters, diagrams and teaching aids in classrooms and lecture halls.