Wood Screw DIN 96
Wood screw DIN 96: A4/A2 steel, zinc coating, round head with slot. FLOK supplies DIN 96 from stock.
The DIN 96 wood screw is a metal fastener in the form of a rod with external medium-pitch thread and a spear-shaped pointed tip. The head is hemispherical with a straight slot sized for the corresponding screwdriver. No pre-drilled hole is required: the pointed tip allows the screw to be driven quickly into wood and provides a high degree of compression between the joined surfaces.
Stainless steel grades A4 and A2 are used for manufacturing. If additional surface protection is required, electroplated or hot-dip galvanizing is applied.
Unlike a nail, a screw joint can be disassembled without damaging the surfaces, which is important when assembling and disassembling furniture and other structures. The thread pitch, thread height, taper, and tip sharpness are standardized by DIN 96, ensuring consistent fastening quality.
Buy DIN 96
FLOK supplies DIN 96 wood screws from stock.
| d | 1.6 | 2 | 2.5 | 3 | 3.5 | 4 | 4.5 | 5 | 6 | 8 |
|---|---|---|---|---|---|---|---|---|---|---|
| dk | 3.2 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 12 | 16 |
| k | 1.1 | 1.4 | 1.7 | 2.1 | 2.4 | 2.8 | 3.1 | 3.5 | 4.2 | 5.6 |
| n | 0.4 | 0.5 | 0.6 | 0.8 | 0.8 | 1 | 1 | 1.2 | 1.6 | 2 |
Designations:
d - screw shank diameter
dk - round head diameter of the screw
k - head height
n - slot width
Estimate for the “Wood Screw DIN 96” category
Send a specification or specify volumes — we will prepare a commercial proposal with timelines and payment terms within one business day.