DIN 940 Threaded Stud, Screw-In End ~ 2.5d, Metric Thread
FLOK supplies DIN 940 threaded studs made of steel 5.8, 8.8, 10.9, stainless steel A1–A5 and brass with zinc-plated coating, sizes from 1 to 15 cm.
Threaded stud DIN 940, screw-in end ~2.5d, metric thread, zinc-plated. Equivalent — GOST 22034.
Materials:
- Steel 5.8, 8.8, 10.9.
- Coated steel: electrogalvanized zinc plating.
- Stainless steel A1, A2, A3, A4, A5.
- Non-ferrous metals, alloys: brass.
The stud is used in assemblies and structures requiring frequent disassembly. Unlike a bolt, one end of the stud is permanently screwed into the fixed part, while the other end, via a nut, provides fastening and disconnection. An example is mounting the cylinder head of an internal combustion engine to the block.
DIN 940 studs are used in the installation of ventilation structures, mounting outdoor advertising, in mechanical engineering, machine-tool building, manufacturing of agricultural machinery and equipment, and in the construction industry.
The products comply with GOST regulations, the DIN standard and ISO certification. Steels of various classes are used for manufacturing, including stainless steel of classes A1–A5. For operation in aggressive environments, a galvanic zinc coating is applied; for especially severe operating conditions, brass and high-strength alloys are used.
According to GOST, threaded stud 940 is produced in sizes from 1 to 15 centimeters.
Dimensions of DIN 940 threaded stud in mm:
| l | d | |||
|---|---|---|---|---|
| M8 | M12 | M16 | M20 | |
| 25 | ||||
| 50 | ||||
| 140 | ||||
| 150 |
Dimensions of DIN 940 threaded stud in mm
| l | d | |||
|---|---|---|---|---|
| M8 | M12 | M16 | M20 | |
| 25 | + | + | + | + |
| 50 | + | + | + | + |
| 140 | + | + | + | + |
| 150 | + | + | + | + |
Estimate for the “DIN 940 Threaded Stud, Screw-In End ~ 2.5d, Metric Thread” category
Send a specification or specify volumes — we will prepare a commercial proposal with timelines and payment terms within one business day.