ABC Threaded Rod to DIN 1052 for Timber Structures

The ABC threaded rod is used for joining large structures made of solid wood and timber products. These rods comply with the DIN 1052 classification, and the thread conforms to DIN 7998.

The rod has full-length thread, a hexagon head, and a blunt end. The outer thread diameter is 16 mm, with lengths from 800 to 2200 mm. It is made of steel, available with the following coatings: electroplated yellow zinc plating and anti-friction lacquer coating.

Features:

1. Used as a wood screw, complies with DIN 1052;
2. Installation without adhesive;
3. Corrosion protection provided by the coating;
4. Low torque required when driving in;
5. Can be installed in a vertical position;
6. Various coating options.

The application is limited to construction and assembly of large timber structures. The main purpose is to strengthen the bond between structural parts and prevent transverse deformation. Since they work without adhesive, these rods replace glued joints: installation is faster and more convenient at rod lengths from 800 to 2200 mm.

Processing notes:

• When working with pre-drilled holes, the hole is bored out to 12 mm;

• Experience is required when working with rods of this length (800–2200 mm): with small parts, the drill bit may slip.

The ABC threaded rod is a solution for designing and assembling timber structures.

FLOK supplies fasteners and hardware for a wide range of applications, including rare fasteners and threaded rods of various diameters.

d1	Head	Core diameter	Rod length Ls
16.0	22	12	800
			1000
			1200
			1400
			1600
			1800
			2000
			2200

Length of the threaded rod Ls	Standard packaging
	Pack (pcs)	Pallet (pcs)	SPAX №
3.000	10	100	35616000201011