Furniture Connecting Screw for Chipboard

The furniture connecting screw for chipboard is produced with flat heads, partial thread with a wide pitch and single-start direction. It has two head-top design options: with a recess for a special hex key, or with a Pz cross recess for use with a Phillips screwdriver or a power screwdriver.

The fastener is used for joining chipboard or solid wood furniture elements at a right angle, with the working channels pre-drilled. The connecting screw is driven in until the head is flush with the surface of the base material. The fastener can then be concealed under a decorative cap matching the furniture color.

The furniture connecting screw has high strength characteristics and is resistant to rust, as it is made of carbon steel with a zinc or brass coating. The fastener is available in lengths of 40-70 mm and diameters of 5 and 7 mm; the hex socket size is made for use with 3 mm and 4 mm keys.

FLOK supplies furniture connecting screws in all sizes.

Materials:

• Carbon steel
• Coated steel: electroplated zinc, brass plating.

Sizes of furniture connecting screws: diameter 5 and 7 mm, length from 40 to 70 mm, width across flats 3 and 4 mm.

d	d₁	dk	k	s	L
5	5	7.5	6	3	50
7	7	10	10	4	50, 70

Designations:

d - screw thread diameter, max

d₁ - shank diameter, max

dk - head diameter

k - height of shank with head

s - width across flats of hex socket

L - screw length