DIN 18182 Sharp Self-Tapping Screw for Drywall
Sharp self-drilling screw DIN 18182 for drywall and magnesite board, zinc-plated or phosphated. FLOK supplies it for metal profile without pre-drilling.
The sharp self-drilling screw with coarse thread is designed for mounting drywall and magnesite boards onto metal profile. The special head shape ensures tight board clamping and full countersinking of the fastener without protruding above the surface.
The sharp tip of the self-tapping screw allows mounting boards without pre-drilling on profiles up to 0.9 mm thick.
The self-tapping screw is made of zinc-plated steel or phosphate-coated steel. The coating ensures good adhesion with paint and putty compounds during subsequent finishing.
| L (mm) | d | ||
|---|---|---|---|
| 3.8 | 4.2 | ||
| Sharp self-tapping screws for drywall DIN 18182 | 25 | ||
| Sharp self-tapping screws for drywall DIN 18182 | 35 | ||
| Sharp self-tapping screws for drywall DIN 18182 | 45 | ||
| Sharp self-tapping screws for drywall DIN 18182 | 55 | ||
| Sharp self-tapping screws for drywall DIN 18182 | 75 |
See also
-
DIN 7982 Countersunk Head Self-Tapping Screw for Thin Metal Sheets, Form C
-
DIN 96 Wood Screw with Round Head
-
DIN 95 Wood Screw
-
Zinc-Plated Self-Tapping Screw with Drill Bit for Sandwich Panels
-
DIN 7976 Hex Head Self-Tapping Screw
-
ISO 15481 Self-Tapping Screw with Round Head and Drill Point Phillips-KS
-
Furniture Connector Bolt
-
ISO 15480 Hex Head Self-Tapping Screw with Drill Point
Estimate for the “DIN 18182 Sharp Self-Tapping Screw for Drywall” category
Send a specification or specify volumes — we will prepare a commercial proposal with timelines and payment terms within one business day.