DIN 910 Hexagon Head Plug with Collar
FLOK supplies DIN 910 collar plugs with hexagon head — zinc-plated steel, stainless A2, A4, thread M10×1–M30×2, 1/8–1 3/4 inch.
DIN 910 is a cylindrical threaded pipe plug with a collar and external hexagon, made of zinc-plated or stainless steel. Thread is metric fine or inch, thread sizes from M10×1 to M30×2, from 1/8 to 1 3/4 inch.
Materials: coated steel (electro-galvanized), stainless steel A2, A4.
For the normal operation of a unit, engine, gearbox, rear axle of a vehicle, or transmission, certain lubricants are required. Technological channels are provided for filling them in and draining used fluids. These channels are closed with plugs. Among them is the DIN 910 plug.
A unit or machine is considered ready for operation only when the last plug on the last technological channel is correctly fitted. This means the product can be filled with lubricants and put into use. The plug preventing oil leakage from the engine crankcase is considered an important element: if it is lost and the oil leaks, problems arise — ranging from fines for environmental pollution to engine failure.
Description of the DIN 910 plug
The DIN 910 collar plug with hexagon head is a technologically machined metal rod. One end has a hexagon for a specific wrench size, the other end has a thread. It is made of zinc-plated or stainless steel. The design is simple.
Applications
The DIN 910 plug is used in machine building for the production of new products, as well as in technical repair workshops.
| d1 | d2 | s | L |
|---|---|---|---|
| R 1/4” | 18.0 | 13.0 | 21.0 |
| R 3/8” | 22.0 | 17.0 | 21.0 |
| R 1/2” | 26.0 | 19.0 | 26.0 |
| R 5/8” | 28.0 | 19.0 | 26.0 |
| R 3/4” | 32.0 | 24.0 | 30.0 |
| R 1” | 39.0 | 27.0 | 32.0 |
| R1 1/2” | 55.0 | 30.0 | 33.0 |
| R 2” | 68.0 | 36.0 | 40.0 |
| M8x1.0 | 14.0 | 10.0 | 17.0 |
| M16x1.5 | 21.0 | 170. | 21.0 |
| M18x1.5 | 23.0 | 17.0 | 24.0 |
| M20x1.5 | 25.0 | 19.0 | 26.0 |
| M24x1.5 | 29.0 | 22.0 | 27.0 |
| M27x2.0 | 36.0 | 24.0 | 30.0 |
| M30x2.0 | 36.0 | 24.0 | 30.0 |
| d₁ | s | d₂ | m | s |
|---|---|---|---|---|
| G 1/8” A | 3 | 14 | 6 | 10 |
| G 1/4” A | 3 | 18 | 6 | 13 |
| G 3/8” A | 3 | 22 | 6 | 17 |
| G 1/2” A | 4 | 26 | 8 | 19 |
| G 5/8” A | 4 | 28 | 8 | 22 |
| G 3/4” A | 4 | 32 | 10 | 24 |
| G 7/8” A | 4 | 36 | 10 | 24 |
| G 1 A | 5 | 39 | 11 | 27 |
| G 1 1/8” A | 5 | 44 | 11 | 27 |
| G 1 1/4” A | 5 | 49 | 12 | 30 |
| G 1 1/2” A | 5 | 55 | 12 | 30 |
| G 1 3/4” A | 5 | 62 | 15 | 36 |
| G 2 A | 5 | 68 | 15 | 36 |
| M8×1 | 3 | 14 | 6 | 10 |
| M10×1 | 3 | 14 | 6 | 10 |
| M12×1.5 | 3 | 17 | 6 | 13 |
| M14×1.5 | 3 | 19 | 6 | 13 |
| M16×1.5 | 3 | 21 | 6 | 17 |
| M18×1.5 | 4 | 23 | 6 | 17 |
| M20×1.5 | 4 | 25 | 8 | 19 |
| M22×1.5 | 4 | 27 | 8 | 19 |
| M24×1.5 | 4 | 29 | 9 | 22 |
| M26×1.5 | 4 | 31 | 10 | 24 |
| M27×2 | 4 | 32 | 10 | 24 |
| M30×1.5 | 4 | 36 | 10 | 24 |
| M30×2 | 4 | 36 | 10 | 24 |
| M33×2 | 5 | 39 | 11 | 27 |
| M36×1.5 | 5 | 42 | 11 | 27 |
| M36×2 | 5 | 42 | 11 | 27 |
| M38×1.5 | 5 | 44 | 11 | 27 |
| M42×1.5 | 5 | 49 | 12 | 30 |
| M42×2 | 5 | 49 | 12 | 30 |
| M45×1.5 | 5 | 55 | 12 | 30 |
| M45×2 | 5 | 55 | 12 | 30 |
| M48×1.5 | 5 | 55 | 12 | 30 |
| M48×2 | 5 | 55 | 12 | 30 |
| M52×1.5 | 5 | 60 | 12 | 30 |
| M56×2 | 5 | 64 | 15 | 36 |
| M64×2 | 5 | 72 | 15 | 36 |
Estimate for the “DIN 910 Hexagon Head Plug with Collar” category
Send a specification or specify volumes — we will prepare a commercial proposal with timelines and payment terms within one business day.