DIN 314 wing nut with rectangular wings
FLOK supplies DIN 314 wing nuts with rectangular wings, M4–M12, product grades A and B, steel 35, 20G2R, with zinc or nickel plating.
DIN 314 covers wing nuts with rectangular-shaped wings. This is a special type of fastener designed for hand tightening and loosening without additional tools. The product is suitable for quick-release joints that need to be frequently disassembled and reassembled. In form AF the wings are rectangular, in form GF they are rounded. The nut is used in joints without high loads, since hand tightening does not provide high strength.
Characteristics and features
The fasteners are made of carbon steel and may additionally have nickel or zinc plating. For highly corrosive environments, nuts made of austenitic stainless steel or brass are used.
Technical characteristics:
- Steel grades used: 35, 20G2R.
- Product grades – A and B.
- Nominal thread diameter – from M4 to M12.
FLOK supplies fasteners for quick-release joints.
See also
-
DIN 970 Hexagon Nut with Metric and Inch Thread
-
DIN 439 Hexagon Thin Nut with Chamfer, Form A
-
DIN 971 Hexagon Nut with Metric Fine Thread
-
DIN 439 Hexagon Thin Nut, Chamfered, Form B
-
DIN 977 Hexagon Weld Nut with Flange
-
DIN 6303 Knurled Nut
-
DIN 6915 Hexagon High-Strength Nut, Zinc-Plated Steel
-
DIN 22425 Triangular Nut with Collar
Estimate for the “DIN 314 wing nut with rectangular wings” category
Send a specification or specify volumes — we will prepare a commercial proposal with timelines and payment terms within one business day.