Facade Wall Plug for Thermal Insulation

FLOK’s catalogue features plastic disc-type facade wall plugs. This is a special type of fastener designed for attaching thermal insulation materials to walls. It can be used for fixing to concrete and wooden walls, as well as to steel structures.

The wall plugs are made of polymer materials that are not subject to corrosion, ensuring a long service life. They are equipped with expansion elements made of carbon steel.

Product range in the catalogue

The catalogue includes the following types of disc-type wall plugs:

• With a hammer-in expansion element for secure fixing in the base. Suitable for exterior facade insulation, including walls with a thin plaster layer.
• With a screw-in steel expansion element. The threaded part reduces the risk of the wall plug being pulled out of the wall under various natural forces.
• With a hammer-in polymer element. It is made of impact-resistant polyamide, a plastic that is not subject to corrosion.
• With a hammer-in metal expansion element and additional thermal insulation. The expansion element is fitted with a protective coating and an additional thermal insulation cap.

The choice depends on the operating conditions and the reliability requirements for the insulation layer. Polymer wall plugs help retain heat and prevent cold bridges from forming.

Ordering terms at FLOK

Contact FLOK’s managers to discuss ordering terms.

Types of facade wall plugs you can buy from FLOK

Disc-type polymer wall plug with a hammer-in metal expansion element and thermal insulation Designed for fixing insulation boards to the enclosing structure in facade thermal insulation systems, both with a thin plaster layer and with an air gap. The wall plug is made of block copolymer, the MH expansion element is made of carbon steel with a durable anti-corrosion coating and is protected by a thermal insulation cap made of impact-resistant polyamide. Dimensions: Anchor length (mm) Expansion zone (mm) Thickness of material being fixed (mm)* Hole diameter (mm) Disc element diameter (mm) 100 50 50 8 60 120 50 70 8 60 140 50 90 8 60 160 50 110 8 60 180 50 130 8 60 200 50 150 8 60 220 50 170 8 60 240 50 190 8 60 260 50 210 8 60	Application:
Disc-type polymer anchor with a screw-in metal expansion element and thermal insulation. The expansion element has a threaded part to improve pull-out resistance Designed for fixing insulation boards to the enclosing structure in facade thermal insulation systems, both with a thin plaster layer and with an air gap. The wall plug is made of block copolymer, the MH expansion element is made of carbon steel with a durable anti-corrosion coating and is protected by a thermal insulation cap made of impact-resistant polyamide. Dimensions: Anchor length (mm) Expansion zone (mm) Thickness of material being fixed (mm)* Hole diameter (mm) Disc element diameter (mm) 100 50 50 8 60 120 50 70 8 60 140 50 90 8 60 160 50 110 8 60 180 50 130 8 60 200 50 150 8 60 220 50 170 8 60 240 50 190 8 60 260 50 210 8 60	Application:
Disc-type polymer anchor with a hammer-in polymer expansion element Designed for fixing insulation boards to the enclosing structure in facade thermal insulation systems, both with a thin plaster layer and with an air gap. The wall plug is made of block copolymer, the MH expansion element is made of impact-resistant polyamide. Dimensions: Anchor length (mm) Expansion zone (mm) Thickness of material being fixed (mm)* Hole diameter (mm) Disc element diameter (mm) 95 45 50 8 60 115 45 70 8 60 145 45 100 8 60 165 45 120 8 60 175 45 130 8 60 195 45 150 8 60 225 45 180 8 60	Application:
Disc-type polymer anchor with a hammer-in metal expansion element and thermal insulation. The disc-type wall plug has depth-limiting ribs Designed for fixing insulation boards to the enclosing structure in facade thermal insulation systems, both with a thin plaster layer and with an air gap. Best suited for fixing low-density insulation boards. The wall plug is made of block copolymer, the expansion element is made of carbon steel with a durable anti-corrosion coating and is protected by a thermal insulation cap made of impact-resistant polyamide. Dimensions: Anchor length (mm) Expansion zone (mm) Thickness of material being fixed (mm)* Hole diameter (mm) Disc element diameter (mm) 95 45 50 8 60 115 45 70 8 60 145 45 100 8 60 165 45 120 8 60 175 45 130 8 60 195 45 150 8 60 225 45 180 8 60	Application:
Disc-type polymer anchor with a hammer-in polymer expansion element. The disc-type wall plug has depth-limiting ribs Designed for fixing insulation boards to the enclosing structure in facade thermal insulation systems, both with a thin plaster layer and with an air gap. Best suited for fixing low-density insulation boards. The wall plug is made of block copolymer, the expansion element is made of carbon steel with a durable anti-corrosion coating and is protected by a thermal insulation cap made of impact-resistant polyamide. Dimensions: Anchor length (mm) Expansion zone (mm) Thickness of material being fixed (mm)* Hole diameter (mm) Disc element diameter (mm) 95 45 50 8 60 115 45 70 8 60 145 45 100 8 60 165 45 120 8 60 175 45 130 8 60 195 45 150 8 60 225 45 180 8 60	Application:

Buy roofing wall plug

Designation	Wall plug length	Wall plug head diameter	Wall plug shank diameter	Max. insulation thickness	Min. hole depth	Hole diameter
IZO 10×80	80	60	10	50	40	10
IZO 10×90	90	60	10	60	40	10
IZO 10×100	100	60	10	60	55	10
IZO 10×110	110	60	10	60	55	10
IZO 10×120	120	60	10	70	55	10
IZO 10×140	140	60	10	100	55	10
IZO 10×160	160	60	10	120	55	10
IZO 10×180	180	60	10	130	60	10
IZO 10×200	200	60	10	150	60	10